Rifle Scope Mount for Blaser Hunting Rifles

Aimpoint Micro H2 - with original Blaser saddle mount

Aimpoint Micro H2 with original Blaser saddle mount as a package The Micro H2 is the result of feedback from long-time customers who want an even more powerful driven hunt red-dot-sight. Reliability, fast target acquisition and ruggedness are the main features. The red dot can be grasped intuitively and is parallax-free. 12 light levels are available - suitable for daylight. The housing is waterproof, the battery (1x CR2032) can continuously illuminate the red dot sight for up to 50,000 hours (more than 5 years). Details: Size of the light spot: 2 MOA Parallax-free Battery supply: CR 2032 12 daylight-compatible dimming levels Waterproof length: 68 mm width/height: 41 x 36 mm Weight: 243 g Can be used from -30° to +60°. Package: includes a original Blaser saddle mount Hint: The front lens of the Aimpoint is intentionally mounted at an angle! This is not a mistake, but serves to deflect light reflexes (so that the target does not become aware of the shooter).

€869.13*

Blaser Saddle Mount for Aimpoint Micro

The Original Blaser Saddle Mount for Aimpoint Micro The Blaser saddle mount is the standard for all Blaser rifles: The bolt action rifles R8 and R93, combinated rifles B95 & B97, the double rifle S2, the Drilling D99 or BD14 or the Break-Open-Gun K95 - for them all this original Blaser saddle mount is the right accessory to put an Aimpoint Micro H1 or H2 on your rifle as a driven hunt red dot sight. Details: Original Blaser Saddle Mount for Aimpoint Micro H1 & H2 quick-release fasteners incl. screws for mounting the Aimpoint Micro

€479.00*

Fibre Insert for Blaser R93 Rifles (yellow-green)

Fibre Insert for Blaser R93 Rifles (yellow-green) The bead shines bright yellow/green in daylight. This fibre insert is to replace the "normal" black bead of the Blaser R93 rifle for a better aiming performance. The dimensions are about: 2,75mm x 11,0 mm x 14,1 mm Hint: Does not fit the Blaser R8 rifles! Therefor please check the LED-Sight, which fits both: Blaser R8 and R93 and many other type of rifles Only the bead insert is beeing delivered, the pictures shows it´s use on the base.

€12.99*

Henneberger Montage für Docter-Sight für Blaser F3

HMS Docter-Sight - Blaser F3

Henneberger Mount for Docter-Sight on Blaser F3 The Henneberger montages are the inexpensive but high quality connecting device between target optics and weapon. The systems are absolutely recoilproof and repeatable due to precise production from an aluminium alloy. Can be exchanged against the original rail, no changes to the weapon are necessary. The rail is also available without Doctersight base. Details: Rail width 15 mm Overall height of the "assembly": 0 mm

€269.00*

Henneberger Montage für Docter-Sight / Blaser R93 / R8

HMS Docter-Sight - Blaser R93 / R8

Henneberger Montage Docter-Sight - Blaser R93 / R8 Die Henneberger Montagen sind das preiswerte aber qualitativ hochwertige Verbindungsglied von Zieloptik und Waffe. Durch genauste Fertigung aus einer Aluminiumlegierung sind die Systeme absolut schussfest und wiederholgenau. Details: Für System Blaser ( Modelle R8, R93, 95, 97) Version Blaser auch für Zeiss Compact Point (Vers. Zeissplatte) verwendbar Einfachste Handhabung per Hebel, ohne Hilfsmittel möglich. Absolut Schussfest und Wiederholgenau. Äußerst kompakt da nur in einer Basis verriegelt wird. Bewegliche Teile aus Stahl, an belasteten Bereichen gehärtet. Bauhöhe 7,5 mm

€189.00*

HMS Samo

HMS SAMO - An alternative scope mount for all weapons with Blaser saddle mounts The Henneberger montages are the inexpensive but high quality connection between rifle scopes and weapon. The SAMO system, milled from solid steel, is absolutely recoilproof and without any change of the POI while mounting and dismounting it.This new model is slimmer and lighter than comparable models. The SAMO is available with rings (25.4/26 mm, 30 mm, 34 mm, 36 mm and 40 mm), for Zeiss rail, Swarovski SR rail, Doctersight (also identical models), Aimpoint Micro H1/H2, Trijicon MRO and with Picatinny/Weaver rail. Details: High accuracy recoilproof Made of steel Flat mounting Slim and lightweight Special feature of the version for the Doctersight: With a height of just 3.5 mm, it is probably the flattest scope mount in its segment in the world. Special feature of the version for Swarovski SR rail: Here the teeth are milled from solid steel - and not from a plastic inlay as in the original Blaser scope mount. This is a significant improvement over the original! Hint: Please note that the pictures are only exemplary and the accessories, in this case the rifle as well as the target optics, are not sold.

From €325.00*

HMS SAMO Montage für Blaser - Swarovski SR-Schiene

HMS SAMO scope mount for Blaser - Swarovski

HMS SAMO mount for Blaser - Swarovski SR rail - a first class mount. The Henneberger SAMO mount was designed as a cost-effective and first-class alternative for Blaser rifles. The HMS SAMO has detailed solutions which are better than the original. For example, the serration of the mount for Swarovski SR rail is milled from the solid. In addition, the adjustment screw for adjusting the holding force is provided with a TORX nut instead of the Mherfach slotted nut. This allows for much easier adjustment with standard tools (Torx wrench). Details: high quality assembly MADE IN GERMANY accurately manufactured on CNC machines Clamping nut with TORX drive toothing of the Swarovski SR rail milled from the solid suitable for Blaser rifles suitable for Swarovski SR rail

€325.00*

HMS SAMO scope mount for Blaser - Zeiss

HMS SAMO Mount for Blaser - Zeiss The Henneberger SAMO mount suitable for Blaser rifles and target optics with Zeiss rail. The HMS SAMO has detail solutions which are better than the original. For example, the adjustment screw for the adjustment of the holding force is provided with a TORX nut instead of the multiple slotted nut. This allows a much easier adjustment with standard tools (Torx wrench). Details: high quality assembly MADE IN GERMANY accurately manufactured on CNC machines clamping nut with TORX drive suitable for Blaser rifles suitable for Zeiss rail

€325.00*

Innogun Quick Release Mount for Blaser - ATN

Innomount quick detachable scope mount for Blaser - ATN This Innoumount quick detachable mount is a specialy designed for Night Vision scopes from ATN. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for X-Sight I+II / Thor / Mars Height: 12 mm Type number: 50-ATN-12-00-800

€329.00*

Innogun Quick Release Mount for Blaser - ATN 4

Innomount quick detachable scope mount for Blaser - ATN 4 This Innoumount quick detachable mount is a specialy designed for the Night Vision scope ATN 4 (and fits also X-Sight 4K PRO / X-Sight 4K Buckhunter / Thor 4. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for ATN 4 / X-Sight 4K PRO / X-Sight 4K Buckhunter / Thor 4 Height: 24 mm Type number: 50-ATN4-24-00-800

€329.00*

Innomount Schnellspannmontage für Blaser - Dedal Hunter

Innogun Quick Release Mount for Blaser - Dedal Hunter

Innomount quick detachable scope mount for Dedal Hunter This Innoumount quick detachable mount is a specialy designed for Dedal Hunter Night Vision scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Dedal Hunter Height: 14 mm Type number: 50-DH-14-00-800

€329.00*

Innomount SSM - Blaser - Fortuna General

Innogun Quick Release Mount for Blaser - Fortuna General

Innomount quick detachable scope mount for Blaser - Fortuna General This Innoumount quick detachable mount is a specialy designed for a Fortuna General Night Vision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Fortuna General Height: 18 mm Type number: 50-FG-18-00-800

€329.00*

Innomount SSM - Blaser - Fortuna General One

Innogun Quick Release Mount for Blaser - Fortuna General One

Innomount quick detachable scope mount for Blaser - Fortuna General One This Innoumount quick detachable mount is a specialy designed for a Fortuna General One Night Vision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Fortuna General One Height: 14 mm Type number: 50-FG1-14-00-800

€329.00*

Innomount Schnellspannmontage für Blaser - GSCI Wolfhound

Innogun Quick Release Mount for Blaser - GSCI Wolfhound

Innomount quick detachable scope mount for GSCI Wolfhound This Innoumount quick detachable mount is a specialy designed for GSCI Wolfhound Night Vision scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for GSCI Wolfhound Height: 16 mm Type number: 50-GSWH-16-00-800

€329.00*

Innogun Quick Release Mount for Blaser - Guide TS450

Innomount quick detachable scope mount for Blaser - Guide TS450 This Innoumount quick detachable mount is a specialy designed for Guide TS450 themal image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Guide TS450 Height: 17 mm Type number: 50-GT-17-00-800

€332.99*

Innomount SSM - Blaser - HIKMicro Thunder TH 35

Innogun Quick Release Mount for Blaser - HIKMicro Thunder TH 35

Innomount quick detachable scope mount for HIKMicro Thunder TH 35 This Innoumount quick detachable mount is a specialy designed for HIKMicro Thunder TH 35 Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for HIKMicro Thunder TH 35 Height: 18 mm Type number: 50-HMT-18-00-800

€359.00*

Innogun Quick Release Mount for Blaser - I Ray Mini

Innomount quick detachable scope mount for I Ray Mini This Innoumount quick detachable mount is a specialy designed for I Ray Mini (Liemke Merlin 19E/25E) Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for I Ray Mini (Liemke Merlin 19E/25E) Height: 16 mm Type number: 50-IRM-16-00-800

€329.00*

Innogun Quick Release Mount for Blaser - I Ray Rico

Innomount quick detachable scope mount for I Ray Rico This Innoumount quick detachable mount is a specialy designed for I Ray Rico Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for I Ray Rico Height: 10 mm Type number: 50-IRR-10-00-800

€329.00*

Innogun Quick Release Mount for Blaser - I Ray Saim

Innomount quick detachable scope mount for I Ray Saim This Innoumount quick detachable mount is a specialy designed for I Ray Saim Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for I Ray Saim (Liemke Sperber 25/35) Height: 16 mm Type number: 550-IRS-16-00-800

€359.00*

Innogun Quick Release Mount for Blaser - I Ray X-Sight

Innomount quick detachable scope mount for I Ray X-Sight This Innoumount quick detachable mount is a specialy designed for I Ray Xsight (Liemke Sperber 50 & 64 / Lahoux Scope) Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for I Ray Xsight (Liemke Sperber 50 & 64 / Lahoux Scope) Height: 16 mm Type number: 50-IRX-16-00-800

€329.00*

Innomount SSM - Weaver/Picatinny - Pard NV007 / NV008

Innogun Quick Release Mount for Blaser - Pard NV008

Innomount quick detachable scope mount for Blaser - Pard NV008 This Innoumount quick detachable mount is a specialy designed for Pard NV008 and SA-Series Night Vision scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Pard NV008 / SA-Series Height: 13 mm Type number: 50-PD-13-00-800

€329.00*

Innomount Schnellspannmontage für Blaser - Picatinny

Innogun Quick Release Mount for Blaser - Picatinny

Innomount quick detachable scope mount for Blaser - Picatinny Rail This Innomount quick-release mount has an integrated Pictianny rail on the upper side and is therefore ideally suited for mounting driven hunt sights, red dot sights or other accessories using the Weaver or Pictinny mount. Due to the uniform mounting of all newer Blaser hunting rifles, this mount naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. Details: Clamping lever with protection against unintentional opening repeatable accuracy made of steel suitable for Blaser with a Picatinny Rail on top Overall height: 20 mm Type number: 50-PT-20-00-800

€329.00*

Innomount Schnellspannmontage für Blaser - Picatinny Long

Innogun Quick Release Mount for Blaser - Picatinny Long

Innomount quick detachable scope mount for Blaser - Picatinny Rail Long This Innomount quick-release mount has an integrated Pictianny rail in an extra long design on the upper side and is therefore ideally suited for mounting driven hunt sights, red dot sights, night vision technology or other accessories using the Weaver or Pictinny mount. Due to the uniform mounting of all newer Blaser hunting rifles, this mount naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. Details: Clamping lever with protection against unintentional opening repeatable accuracy made of steel suitable for Blaser with an extra long Picatinny rail on the top side Overall height: 20 mm Total Length: 205 mm Type number: 50-PT-20-100-800

€329.00*

Innomount Schnellspannmontage für Blaser - Pulsar

Innogun Quick Release Mount for Blaser - Pulsar Apex / Digisight / Trail Thermal Sight

Innomount quick detachable scope mount for Pulsar Apex / Digisight / Trail Thermal Sight This Innoumount quick detachable mount is a specialy designed for Pulsar APEX / Digisight / Trail Thermal sight night vision devices. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: quick detachbale design repeatable accuracy made of steel suitable for Blaser rifles suitable for Pulsar APEX / Digisight / Trail Thermal sight Overall height: 10 mm Type number: 50-PA-10-00-800

€329.00*

Blaser's rifle scope mount is considered groundbreaking. Because saddle mounting is simple yet rock solid. It is available in a variety of designs and so target optics can be mounted on the Blaser hunting rifles with the SR rail from Swarovski Optik or the Zeiss inner rail. In our shop you will find everything you need for the stable connection of the target optics with your Blaser hunting rifle.

Saddle Mounts - fast, stable & simple

Blaser introduced saddle mounts in 1993 and from then on supplied almost all weapons with the saddle mount. The principle is based on four cut-outs above the chamber. Additional mounting parts are not necessary. The rifle scope mount is placed in the cut-outs and fastened by means of two swivel levers.

The Blaser saddle mount is characterised by its low design. It lies directly on the barrel and is therefore particularly suitable for Swarovski and Zeiss rails and optics. The Blaser saddle mount is suitable for the Swarovski-SR rail and the Zeiss VM rail, among others. In addition, the saddle mount in its respective version is suitable for all weapon models, i.e. Blaser R8, Blaser R93, Blaser D99, Blaser BBF97, Blaser BD14 and Blaser K95.

The handling of the Blaser assembly is extremely simple and fast. This makes it easy to change different target optics and hunting weapons without changing the point of impact. The same applies to the disassembly when transporting the hunting rifle.

Further mounts and red dot sights

The manufacturer Innogun has produced the Innomount quick-release mount especially for Blaser hunting rifles. The one-piece assembly is characterized by high quality, quick detachable and repeating accuracy. In our assortment you will find the quick detachable mount with rings as well as for all inner rails in different designs. We also offer Aimpoint Micro red dot sights with saddle mounts from Blaser, which are ideal for driven hunts or follow up wounded game.

Please call us if you have any questions about our products or need assistance in selecting the right scope mount for your Blaser hunting rifle. We will be happy to advise you. You can reach us during business hours at +49-6071-92276.