HMS SAMO - An alternative scope mount for all weapons with Blaser saddle mounts The Henneberger montages are the inexpensive but high quality connection between rifle scopes and weapon. The SAMO system, milled from solid steel, is absolutely recoilproof and without any change of the POI while mounting and dismounting it.This new model is slimmer and lighter than comparable models. The SAMO is available with rings (25.4/26 mm, 30 mm, 34 mm, 36 mm and 40 mm), for Zeiss rail, Swarovski SR rail, Doctersight (also identical models), Aimpoint Micro H1/H2, Trijicon MRO and with Picatinny/Weaver rail. Details: High accuracy recoilproof Made of steel Flat mounting Slim and lightweight Special feature of the version for the Doctersight: With a height of just 3.5 mm, it is probably the flattest scope mount in its segment in the world.   Special feature of the version for Swarovski SR rail: Here the teeth are milled from solid steel - and not from a plastic inlay as in the original Blaser scope mount. This is a significant improvement over the original!   Hint: Please note that the pictures are only exemplary and the accessories, in this case the rifle as well as the target optics, are not sold.

Innomount quick detachable scope mount for Blaser - Schmidt & Bender Convex Rail The Innomount quick release mount for Blaser hunting rifles is a solid connection between rifle and optics. Innomount attaches great importance to the highest manufacturing quality. The assembly is not only an inexpensive alternative to the original Blaser saddle mount, but it also has innovative detail solutions. Due to the uniform mounting of all newer Blaser hunting rifles, this mounting naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. The quick-release mount is repeatable and has innovative quick-release fasteners. These work reliably and are easy to operate. When closed, they also lie in the housing - so they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. By using 3 sliding blocks to fix the rifle scope with Schmidt & Bender convex rail, a reliable hold of the optics on the rifle scope mounting is guaranteed.    Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser suitable for Schmidt & Bender Convex rail Overall height: 10 mm Type Number: 50-SB-10-00-800

Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder.   Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).

The LED illuminated front sight for your rifle - shooting with open sights until the dark This LED-Sight allows for shooting accurately under the most adverse light conditions with a simple turn of a a button. Recoil proof, tough, reliable, for the most demanding hunts. Seeing is believing!   advantages of the LED-Sight compared against other options: While using a rifle scope, You carry the LED-Sight always on your rifleå«s barrel, while red dots wonå«t be on place when You suddenly need them. Completly waterproof and no optical side effects by glaring through the water like you have by some red dots The Classic edition works in daylight like a traditional black sight: passive without any battery. When You turn the LED on, it plays out itå«s advantages: perfect aiming conditions, even under worst light conditions! (For mainly daylight use, please check the "Day&Nightfire" ore "Firefly" - as those work in sunlight like a fibre sight as well. Very cheap compared to other options like red-dots or scopes Perceft for driven hunts and follow-ups of wounded game...   details: easy 1:1 exchange with most rifles: Blaser R93 / Blaser R8 / Blaser K95 / Sauer 202 & 303 & 404 / Heym SR 21 & 30 / Mauser M03, Mauser M12, and many more With all other rifles: all needed is a potrusion bolt on the barrel battery works about 10-12 hours Sight is hight adjustable reduncy: without battery, it works like a classicåÊblack sight   manuals for download: Gebrauchsanleitung-deutsch-1-0 (German) Manual-for-LED-Sight (English) Mode-d-EmployåÊ(French)