Lupine Piko TL Max - the compact flashlight with 1600 lumens The Lupine Piko TL Max is an extremely versatile high-performance torch with extended battery life: used as a torch for hunting, trekking, outdoor or security, Solo can be used as a compact yet powerful bicycle lamp by means of an optionally available bicycle holder (does not have STVO approval - it is MUCH too bright! ;-) ). The Piko TL Max has an integrated Li-Ion battery, can be dimmed to 5 levels, is programmable and also has a red light LED.   Details: Aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.3 Ah (24Wh) Weight: 180g Light range up to 200 m Dimensions: 103 x 42 x 24mm Charging time: 2:45 hours integrated battery capacity display   Scope of delivery: Piko TL Max Lamp Piko TL Charger   Light levels - burning time: 1600 Lumen - 1:30 hour 800 lumens - 3 hours 650 Lumen - 4 hours 360 lumens - 8 hours 40 lumens - 80 hours

Lupine Blika RX 4 SmartCore - the headlight for hunting, fishing and outdoor activities The Lupine Blika RX 4 SmartCore is the most powerfull headlight You probably have ever seen. With 2100 Lumen it is more powerfull then regular front lights of a car (about 1500 Lumen of light) and it is still very compact and lightweight! But the best of all is the shadow free light it gives You - illuminating your complete field of view like daylight! The Blika´s head is maschined from solid Alumium, black anodized. It offers "normal" floodlight, a narrow beam for long distance, a weak LED for reading the map, plus RED light, BLUE light & GREEN light mode for special purposes and keeping Your night visibility. The battery comes with a 100-240V charger and shows You the level of energy left. You could buy additional battery-packs in various sizes from 2,0 Ah to 20 Ah.  The headlight could be remote controlled and programmed by cellular App and offers different light strength at each source of light, so You always have the right amount of light You need. When the battery gets empty, a warning will be given and there is still enough runtime not to lost in the dark (depends on temperture and condition of the battery but under normal conditions, there is at least 1/2 hour left at low output) A broad range of accessories is beeing offered, to use this high output LED lamp on Your bicycle, headlight, helmet mounted lamp for any kind of advanture You ever been thinking off: Hunting, Fishing, Sailing, Explorations, Work, Backpacking, Climbing, Military & Defence - whatever You do, this lamp will be Your favourite choice - promised!   scope of delivery: Blika R lamp with Bluetooth remote controll unit 3,5 Ah Smartcore battery 100-240 V battery-charger "Wiesel" (depends on Your country, a travel adaptor may be necessary) headband with FrontClick & Fastclick option bluetooth remote switch bracelet for bluetooth remote (to use it on Your bicycle´s handle bar for example)   details: solid head maschined from Alumnium IP 68 (2m waterproof) IK 09 (shockproof) weight: 250g beam distance up to 300m charging time: 2: 45 hours remote controlled by bluetooth Made in Germany   light output & battery time: 2100 Lumen - 1:05 hours 1100 Lumen - 2:30 hours more settings are programmable - run time up to 80 hours 50/90/120 Lumen - 12 hours (red, green, blue LED)   app-store: IOS for Apple: https://itunes.apple.com/us/app/lupine-light-control/id1031179882 Android: https://play.google.com/store/apps/details?id=de.lupine.app   downloads: Gebrauchsanleitung / English Manual - Download here.

Lupine Seatrail Mount for Rotlicht - for assembling the Lupine red light to the bicycle The Lupine seatrail mount allows the Lupine red light to be attached to the seatrail if there is no room in the seat post. The red light is simply clicked into the holder from below. The seatrail mount ensures a safe and tidy fastening in every situation. Details: Press the button to release the red light. incl. Allen key and screwdriver

Lupine Betty RX 7 / 14 - the headlamp with 5400 lumens The Lupine Betty RX is the brightest headlamp and has been specially developed for a wide range of hunting and outdoor activities. In addition to the maximum power of 5400 lumens, 11 different dimming levels and numerous additional functions such as center LED, SOS, FLASH, RVLR and the Alpine emergency signal are available. A few simple steps transform the headlamp into a helmet lamp. It can also be quickly clamped to all poles with a quick-release or attached to the helmet camera holder with a GoPro adapter. The various mounting systems offer you the right mount for every application. Betty is also ideal as cockpit lighting for illuminating over bait (where hunting is now permitted due to the threat of African swine fever by means of light). Also for speleologists these high-performance lamps represent completely new possibilities. Full control thanks to Bluetooth and mobile phone app The Wilma X has a Bluetooth connection and an external switch. Thus, for example, it can be mounted on the handlebars or the treestand parapet, the luminosity can be conveniently adjusted to the current requirements at any time with the thumb or the lighting can be switched on and off. These functions are also available via app on the mobile phone, which can also be used for switching and informs about the current state of charge, etc.. In addition, the dimming levels and special functions can be conveniently activated via the mobile phone and adapted to personal preferences. The SmartCore - battery has a capacity indicator, so that you do not stand suddenly in the dark. (additionally the Bluetooth switch as well as the lamp switch shows this information). The batteries of the Betty are connected via an extension cable. Due to its size and weight, the battery has to be worn in a jacket, vest or otherwise. Betty 7 comes with 6.6 Ah battery, while Betty 14 comes with a bigger 13.2 Ah battery.   Comprehensive accessories for every imaginable purpose A wide range of accessories completes almost every wish and allows the lamp to be adapted for almost every imaginable application. Optional are also other battery variants, the lamp head alone or a version as a helmet lamp available. As accessories there are colour filters, various holders, spare batteries, and much more.   Details: robust aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 6.6 / 13.2 Ah Weight: 150 g with battery 660 g Dimensions: 55mm x 44mm Light range up to 380 m Charging time: 5:20 hours integrated battery capacity display Scope of delivery: Betty R lamphead with Bluetooth control Headband Betty R with cable guide Battery SmartCore 13.2 Ah or 6.6 Ah Bluetooth radio remote control Bracelet for Bluetooth radio remote control Charger One Transport bag L Extension cable 120 cm Light levels - burning time (Betty RX 14): 5400 lumens - 2 hours 3900 lumens - 2:45 hours 3200 lumens - 3:20 hours 2650 lumens - 4:20 hours 2050 Lumen - 6 hours 520 lumens - 23:45 hours 270 lumens - 48 hours 160 lumens - 95 hours 30 lumens - 310 hours NOTE: The data given in the description text refer to the Betty RX 14 - for the Betty RX 7 the runtimes are halved.

Lupine Bike Mount for Neo/Piko/Blika - The elegant solution for attaching your lupine lamp to your bike Lupine quick-release bike mount are a way to elegantly attach the lamphead to your bike. A horizontal adjustment mechanism allows the exact adjustment of the light cone on the track. Because the tensioning device is mounted on the handlebar of your bicycle, the light always falls in the direction of travel. Details: High-quality aluminium alloy CNC milled black anodized Optional for pipe diameters of 25.4 mm, 31.8 mm and 35 mm

Lupine quick release for Betty - The elegant solution for attaching your headlamp to a bike Lupine quick-releases are a way to elegantly attach the lamphead to your bike. A horizontal adjustment mechanism allows the exact adjustment of the light cone on the track. Because the tensioning device is mounted on the handlebar of your bicycle, the light always falls in the direction of travel. Details: High-quality aluminium alloy CNC milled black anodized Optional for pipe diameters of 25.4 mm, 31.8 mm and 35 mm

Lupine Piko TL Toolfree Holder for attaching your flashlight to your bike In no time at all you mount your Piko TL torch to the handlebar with this holder and you have a first-class bicycle torch with lots of light! O-rings for 31.8 mm and 25.4 mm handlebars are included. Details: Optional for tube diameters 25.4 mm, 31.8 mm suitable for Piko TL Max and Piko TL MiniMax

Lupine Rotlicht - the intelligent safety light for road use with StVZO approval The Lupine red light is a clever safety light with brake light function. It uses a light sensor to detect how much light needs to be emitted at all times, ensuring efficient use of battery capacity. The new version is now StVZO conform (among other things by less strong lighting than the predecessor model) and may be used thus in the road traffic of the Federal Republic of Germany.   Details: Aluminium housing, milled from solid material modus: continuous light Two housing colours available IP 68 (2m waterproof) IK 09 (impact strength) Weight: 55g Dimensions: 20 x 32 x 60mm Scope of delivery: Lupine Rotlicht (StVZO) with integrated rechargeable battery Light levels: up to 40 Lumen

Lupine Blika All-In-One Kit Whether you want to use the Blika as a helmet lamp or as a headlamp: You can change the Blika All-In-One Kit as you wish in one easy step, because the Blika All-In-One Kit has a multitude of adaptation and mounting options for the 2400 lumen bright lamp head. If you buy the matching bike holder, you can also use this set as high performance bike lighting off the beaten track (no STVO approval!). Scope of delivery: Blika R lamp head (Bluetooth) Bluetooth 2-way wireless pushbutton radio holder Peppi V5 3.5 Ah SmartCore FastClick rechargeable battery Headband with FastClick and FrontClick bracket Helmet holder with FrontClick Battery helmet holder with Fast Click Charger Wiesel (This is the Blika RX4 Smartcore including accessory set)   The Lupine Blika RX 4 has been developed as a headlamp especially for the versatile use on hunting and outdoor activities. In addition to the maximum power of 2400 lumens (which is considerably more than the headlights of a car!) there is also a red light, green light, special reading function and illumination of the close-up range available. By the FrontClick change system the Blika can be transformed in the twinkling of an eye from a headlamp to a light system and can be used by optional mountings e.g. as a bicycle lamp or also as a treestand lighting for the illumination over the bait (where the hunt is permitted recently due to the threatening African swine fever by means of light).   Extensive accessories for every imaginable purpose A wide range of accessories completes almost every wish and allows the lamp to be adapted for almost every imaginable application. Optional are also other battery variants, the lamp head alone or a version as a helmet lamp available. As accessories there are colour filters, various holders, spare batteries, and much more.   Details: robust aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.5 Ah (25Wh) Weight: 250g Light range up to 300 m Charging time: 2:45 hours integrated battery capacity display Light levels - burning time: 2400 Lumen - 1:05 hour 1100 lumens - 2:30 hours 50/90/120 lumens - 12 hours (red, green, blue LED) further freely programmable light levels via mobile app  

Lupine Piko All-In-One Kit With the Piko All-In-One Kit, you have the option of using the Piko with its stunning 2100 lumens light output either as a helmet lamp or as a headlamp. With the FrontClick attachment, the change is completed within a few seconds. The Bluetooth radio module of the lamphead opens up additional possibilities: If you add a bicycle holder to the kit, you can also use this lamp as a high performance bicycle light for off-road use (not STVO approved).   Full control thanks to Bluetooth and mobile phone app The Piko RX has a Bluetooth connection and an external switch. This means that it can be mounted on the bicycle handlebar or the pulpit parapet, for example, or the luminosity can be conveniently adjusted to current requirements with the thumb at any time, or the lighting can be switched on and off. These functions are also available via app on the mobile phone, which can also be used for switching and informs about the current state of charge, etc.. In addition, the dimming levels and special functions can be conveniently activated via the mobile phone and adapted to personal preferences.   Scope of delivery of the All-In-One Kit: Piko R lamphead with Bluetooth control 2100 Lumens Bluetooth switch holder Peppi V5 3.5 Ah SmartCore Fast Click battery Headband with FastClick and FrontClick Hlaterung Helmet holder with FRontClick Battery holder with FastClick Charger Wiesel Details: robust aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.5 Ah (25Wh) Weight: 200g Light range up to 240 m Charging time: 2:45 hours integrated battery capacity display Light levels - burning time: 2100 Lumen - 1:15 hour 950 lumens - 2:30 hours 650 Lumen - 4 hours 360 lumens - 8 hours 170 lumen - 15 hours 40 lumens - 80 hours

Lupine Alpha helmet lamp - uniquely much light The Lupine Alpha is by far the most feasible helmet and bicycle light currently available: With an incredible light output of 8600 lumens, it transforms night into day. But not only the pure performance is convincing, but also the uniform, well-lit beam pattern. The Alpha combines 3 different lenses to a beam pattern tailored for racing use and thus illuminates both the close range and the distance first-class. The lamp head was milled from solid material and is made of anodised aluminium. A large number of cooling fins ensure that the heat is removed, while a strip from LED´s, facing the driver (when mounted on the handlebar), signals the battery status so that the driver is always informed about the charge status.   Bluetooth control The Alpha can not only be controlled via the supplied Bluetooth switch, but also via a mobile phone app. With this, the Alpha can also be programmed to meet individual needs. Different power levels from 3 W to 70 W are available. Thus the light output can be adapted at any time to the needs.   Battery management The battery has been optimized for the enormous performance with a new control unit and power electronics. The capacity indicator now lights up blue. The plug connection has also been redesigned and is not compatible with the previous ones. Therefore the Alpha can only be operated with the special battery and charged with the specially developed "Alpha Charger One".   Mounting options depending on the intended use of the lamp The Lupine Alpha comes as standard either as helmet lamp, whereby it is to be noted that the enterprise is not permitted in Germany due to the enormous achievement in the range of the StVZO! In the operation as helmet lamp the lamp head is fastened with a velcro tape to the helmet & the Akku over a cable fed. The battery can be put into a pocket of the clothing. An optional quick-release is required for use as bicycle lighting. The lamp head is mounted with the corresponding quick release (either 31.8 mm or 35.0 mm), while the battery is attached to the frame with a Velcro tape.   Not only mountain bikers, speleologists, mountaineers, but also cyclists with a special inclination might be interested in this incredible lighting. We expressly point out once again that the operation of the Lupine Alpha in Germany and in the area of the StVZO as bicycle lighting is FORBIDDEN.   Scope of delivery: Alpha Lamphead with 8600 Lumen / 70 Watt Li-Ion battery 14.4 V / 6.9 Ah / 99 Wh Alpha Charger One - Charger Bluetooth remote control Peppi V5 Bluetooth Holder Alpha helmet holder arm (one-sided mounting) Front click helmet holder Velcro short Velcro tape long 120m extension cable light output at maximum light output 1h 20m burning time with lower output up to 110 hours burning time instruction manual Operating instructions for download Optional accessories As an optional accessory there is the possibility to purchase an "Alpha quick release" for bicycle handlebars with 31.8 or 35.0 mm diameter.

Lupine crossbar - for attaching the Lupine red light to a second bicycle The Lupine crossbar for the seat post holder allows the Lupine red light to be attached to a second bicycle. However, the seat post holder is required completely for the first bike. Details: Crossbar as single part

Lupine SL X bicycle lamp for e-bikes: The high beam for bikes! With the SL X bicycle lamp Lupine offers the currently brightest lamp approved by the German Road Traffic Act for E-Bikes and S-Pedelecs. The extremely bright bicycle lamp is guaranteed to provide more light in any weather and daylight - and therefore more safety!   The highlights of the Lupine SL X bicycle lamp at a glance 2800 Lumens of Light Officially approved according to the road traffic regulations Dipped beam and main beam in one lamp Waterproof and impact resistant Bike lamp Lupine SL X for safe day and night rides The innovative bicycle lamp from Lupine combines the best of two worlds: Whether in the 25 km/h version for e-bikes or in the 45 km/h version for S-pedelecs, the SL X bicycle lamp is an extremely powerful light source that can be used for daytime rides as well as rides in the dark. When the high beam is switched on, the 6 automotive LEDs create a daylight corridor above the glare-free cut-off line. At the same time, the SL X bicycle lamp switches on the daytime running light with 6 LEDs, resulting in increased light output and also optimally illuminating the close range. As a result, root passages, among other things, are better illuminated and greater safety is achieved on fast descents. For journeys in the city or in well-lit areas, the low beam of the SL X bicycle lamp provides glare-free light and good visibility in every situation. For rides outside the city, on country roads and in rural areas, the high beam shines extremely bright at the touch of a button, providing the perfect illumination for challenging trails in low daylight or poor weather conditions. The SL X bicycle lamp from Lupine is currently the only Lupine lamp with true daytime running light function that is approved according to the German Road Traffic Act.   Lupine SL X: A bicycle lamp for eternity! The SL X bicycle lamp was built to last and is no ordinary lamp that you throw away after a short time. The housing of the SL X bicycle lamp is waterproof and impact resistant. The housing has been milled from one piece of aluminium and is - typical for Lupine - designed to be easily disassembled and repaired. The SL X bicycle lamp is equipped with a fine sensor system that automatically switches from daytime running light to dipped beam as soon as the ambient light dims. As soon as the low beam is switched on, the SL X cycle light also disengages the high beam. The button clip makes it easy to control the change between low beam and high beam. Depending on the mode selected, the button symbols appear in green or blue. If you have any questions about the innovative Lupine SL X bicycle lamp for e-bikes and S-pedelecs, please do not hesitate to contact us. Call us at 06071-922765 or write us an e-mail and we will be happy to answer your questions immediately.   Scope of delivery: SL X Lamp head Handlebar mount Wired remote control Light cable

Lupine Penta - the compact headlamp The Lupine Penta is an extremely compact headlamp, but delivers up to 1100 lumens of light output. In addition, it is equipped with two red lights (to maintain night vision, inconspicuous light), diffuse reading light (e.g. for reading maps or looking something up on the raised hide) and a variety of lighting modes. The housing is made of robust aluminum and is black anodized, the integrated Li-Ion battery can be charged via USB-C cable. The lamp can either be used with the included headband or can be attached directly to a helmet with an optionally available front click plate. The Penta's compact dimensions and beam pattern are designed to let you see what is happening in front of your feet and go into the distance - so it is ideal for stalking, for breaking up game, but also for jogging, hiking, mountaineering, etc. The Penta is available in two versions with a color temperature of 4500 K (neutral white) or 5700 K (daylight). The neutral white version is less demanding on the eye in the long run, while the daylight version is perceived as brighter.   Details: Weight: 86 g (lamp head alone) Waterproofness IP68 Weight with headband: 110 g Dimensions: 62x46x30 mm Light range up to 120m max. 1100 lumen light output up to 120h battery life (diffuse light) Scope of delivery: Penta Lamphead Headband USB-C charging cable Light levels - burning time: HIGH (7W) - 1 hour MEDIUM (4W) - 1:40 hours LOW (0.4W) - 16:45 hours RED (2W) - 3:20 hours DIFFUS (0.04W) - 129 hours and much more.

Lupine FrontClick handlebar holder 31.8 mm With the Lupine FrontClick handlebar holder 31.8 mm you can attach in no time your Lupine headlamp by means of Front Click on the bicycle handlebar. In particular, the Penta as a compact headlamp can thus be used "quickly times even" as a bicycle lamp. (Note: Not permitted in the area of the German StVO!).The handlebar holder is suitable for bicycle handlebars with a diameter of 31.8 mm. Details: glass fiber reinforced plastic suitable for handlebar diameter of 31.8 mm clamp distance: 50 mm suitable for Lupine headlamps with FrontClick system (except the Alpha) allows especially for the Penta a quick use as a bicycle lamp

Lupine SL F Nano - the minimalist e-bike lighting The Lupine SL F Nano is permanently attached to the handlebar by means of the included clamp and offers the user an e-bike lighting with 600 lumens low beam and 900 lumens high beam. This is switched comfortably and without having to nehemn hands from the handlebars with the switch mounted on the handlebars.   Details: high quality aluminum manufactured lamp head Handlebar switch 600 lumens low beam 900 lumens high beam Open cable ends - depending on the model, additional accessories may be required   Scope of delivery: Lamp head SL Nano Aluminum handlebar mount Wired remote control Bracket screws TX6 and TX15 Light cable with open strands Manual

Lupine SL Nano Classic - classic lighting for your e-bike. The Lupine SL Nano Classic is attached to the fork crown of the bike, city bike or e-bike. Thus, it also does not interfere with a possible handlebar bag and looks "Klassich". But in return, the small lamp has a lot to offer: 600 lumens of light at its best - and at an extremely fair price.   Details: high-quality lamp head made of aluminum Mounting on the fork crown 600 lumen light open cable ends - depending on the model, additional accessories are required Scope of delivery: Lamp head SL Nano bracket for mounting on the fork crown (adjustable) Wired remote control Light cable with open strands Manual

Lupine SL RF Nano - first-class lighting for your e-bike or bike. The Lupine SL RF Nano Classic is permanently attached to the bicycle handlebars with a holder and connected to the bike or e-bike with its cable. The lamp has low beam and high beam. It is controlled by a small Bluetooth button, which is attached to the bicycle handlebar with a holder. Thus, the Instalation and integration of the lamp to the bicycle or e-bike electrics is reduced to a minimum and works reliably and brightly.   Details: high-quality lamp head made of aluminum Mounting on the bicycle handlebar with clamp (31.8 or 35.0 mm diameter) 600 lumen low beam 900 lumen high beam Switchable by Bluetooth switch open cable ends - depending on the model, additional accessories are required Scope of delivery: Lamp head SL Nano Clamp for the bicycle handlebar (31.8 or 35.0 mm) Bluetooth remote control incl. handlebar mount Light cable with open strands Instructions

Lupine Piko RX 4 SmartCore - the universal headlamp with 2100 lumens The Piko RX4 headlamp can be broken down into three characteristics: light, small & powerful. Now in its third generation, it delivers an impressive 2100 lumens of light and can illuminate the night as bright as day. It is not bigger (the lamp head) than a matchbox and weighs only 200g as a complete headlight-system when ready for use with a 3.5 Ah Li-Ion battery. Another new feature is that the Piko has an additional diffuse "reading and camping light". This can be used particularly well for map reading, in the close range etc.. The size of the lamp head has shrunk compared to the previous version, the light output has been increased and the heat management has been improved. The app for control via Bluetooth and the radio module are new and allow a very individual configuration of the lamp.   Unique lighting system for every outdoor adventure Nevertheless, the Piko RX 4 Smartcore is still an individual lighting system for a variety of outdoor applications: As basic equipment it comes as a headlamp. With an optional holder, it can be used effortlessly as a bicycle lamp, helmet lamp or also as treestand lighting (where hunting is permitted due to the threat of African swine fever by means of light). With the optional "USB-One" adapter, the Piko battery can also be used as a power bank, e.g. to charge the mobile phone.   Full control thanks to Bluetooth and mobile app The Piko RX has a Bluetooth connection and an additional external switch. This means that it can be mounted on the bicycle handlebar or the treestand parapet, for example, or the luminosity can be conveniently adjusted to current requirements with the thumb at any time, or the lighting can be switched on and off. These functions are also available via app on the mobile phone, which can also be used for switching and informs about the current state of charge, etc.. In addition, the dimming levels and special functions can be conveniently activated via the mobile phone and adapted to personal preferences. The Piko has a front-click holder, with which the lamp head can be changed in no time at all from e.g. a helmet to the headband or another holder. The SmartCore battery has a capacity indicator so that you are not suddenly in the dark. (In addition, both the Bluetooth switch and the lamp switch display this information). The battery of the Lupine Piko RX 4 SmartCore can be changed with the Fast-Click system in just a few simple steps. Thus, the purchase of a second battery as a replacement and for a quick change can be worthwhile depending on the application.   Comprehensive accessories for every imaginable purpose A wide range of accessories completes almost every wish and allows the lamp to be adapted for almost every imaginable application. Optional are also other battery variants, the lamp head alone or a version as a helmet lamp available. As accessories there are colour filters, various holders, spare batteries, and much more.   Details: robust aluminium housing, milled from solid material up to 2100 lumens light output if required: Bluetooth control via external switch or mobile phone app IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.5 Ah (25Wh) Lamphead size: 32 x 43 x 26mm Weight: 200g Light range up to 210 m Charging time: 2:45 hours integrated battery capacity display (Smartcore) Scope of delivery: Piko RX lamphead 2100 lumen with Bluetooth control and front click mount Headband Piko R FastClick FastClick battery SmartCore 3.5 Ah Bluetooth remote control Bracelet for Bluetooth radio remote control Charger Wiesel Light levels - burning time: 2100 Lumen - 1:15 hour 950 lumens - 2:30 hours 650 Lumen - 4 hours 350 lumen - 8 hours 170 lumen - 15 hours 40 lumens - 80 hours

Lupine FrontClick handlebar holder 35 mm With the Lupine FrontClick handlebar holder 35 mm you can attach in no time your Lupine headlamp by means of Front Click on the bicycle handlebar. In particular, the Penta as a compact headlamp can thus be used "quickly times even" as a bicycle lamp. (Note: Not permitted in the area of the German StVO!).The handlebar holder is suitable for bicycle handlebars with a diameter of 35 mm. Details: glass fiber reinforced plastic suitable for handlebar diameter of 35 mm clamp distance: 50 mm suitable for Lupine headlamps with FrontClick system (except the Alpha) allows especially for the Penta a quick use as a bicycle lamp

Lupine Alpha Lamp Head With the new Alpha lamp head, you can upgrade your "old" Alpha setup to the now whopping 8600 lumen variant or put together a headlamp, helmet lamp or bicycle lighting (only permitted abroad and not in the area of the German StVZO) of the ultimate.      Not only mountain bikers, speleologists, alpinists, but also cyclists with a penchant for the special should be interested in this incredible lighting. We point out again expressly that the operation of the Lupine Alpha in Germany and in the area of the StVZO as bicycle lighting is PROHIBITED.   Scope of delivery: Alpha lamp head with 8,600 lumens / 70 watts. Bluetooth remote control Peppi V5 Bluetooth holder Peppi V5XL Bluetooth holder Frontclick helmet holder Light output 8600 lumens Weight 225g 630 Lux 480m range   instruction manual Operating instructions for download Optional accessories As an optional accessory there is the possibility to purchase an "Alpha quick release" for bicycle handlebars with 31.8 or 35.0 mm diameter.

Lupine C14 Mag International - the first bike taillight with magnetic mount. The Lupine C14 Mag International has a 45 lumen rear light, integrated brake light and brightness sensor and in the International version can also be used a blink and pulse mode (to be seen better). The housing is milled from aluminum. The bicycle tail light is attached via an adapter plate milled from aluminum, which is attached between the saddle stays (standardized distance approx. 35 mm). To this it is then only magnetically "docked", which holds rock solid, but especially in Satdt traffic can be attached and removed again with a flick of the wrist when the bike is "parked". For attachment to carbon saddles, two additional screws are included. The C14 Mag is charged via a magnetic charging cable from the outside.   Note: We point out that the "C14 Mag International" has no STVZO approval and therefore may not be used in road traffic in the Federal Republic of Germany! The red light (International) may therefore only be used outside the scope of the German STVO! (i.e. abroad - but please also inquire there about the respective regulations).   Details: 45 lumen powerful bicycle tail light Aluminum housing, IP 68, IK 09 Weight 87g Dimensions: 71x40x26 mm Light duration 22 h max. charging time: 3h   Scope of delivery: C14 Mag saddle mount magnetic USB charging cable 2x additional screws for carbon saddles manual

Lupine C14 SP (Sattelstützen-Version) - die Rückleuchte für E-Bikes Die C14 SP liefert ein 45 Lumen rotes Rücklicht. Das Gehäuse ist aus Alumnium gefräst und schwarz eloxiert. Befestigt wird es an der Sattelstütze (paßt für einen Durchmesser von 31,6 bis 30,9 mm). Die C14 SP hat eine StVZO-Zulassung. Sie ist kompatibel mit allen E-Bikes. 

Lupine SL Mono - quite simply a functional bicycle lamp. Sometimes life can be quite simple - just like this high-quality and reliable bicycle lamp: mounted on the handlebars in seconds, the Lupine SL Mono lights up automatically or manually controlled if desired. It can be used as a daytime running light with 150 lumens and with up to 700 lumens in the night driving light and glare-free low beam. The lamp is charged via USB-C cable and by means of a special cable it can also be used during the charging process (so you can virtually supply it from the handlebar bag with power from a power bank, if you want to ride longer in the dark. The lamp is available for different handlebar diameters. Details: Bicycle lamp with StVZO approval Daytime running light, low beam, high beam automatic control by means of light sensor or manually daytime running light: 150 lumen maximum power: 700 lumen aluminium housing, IP 68 weight: 115 g dimensions: 45 x 46 x 67mm Reserve tank (so you are not suddenly completely in the dark) Light duration: 700 lumens - 2 hours 350 lumens - 4h 30 min 150 lumens - 16 h Charging time: approx. 3h 30 min