HMS SAMO - An alternative scope mount for all weapons with Blaser saddle mounts The Henneberger montages are the inexpensive but high quality connection between rifle scopes and weapon. The SAMO system, milled from solid steel, is absolutely recoilproof and without any change of the POI while mounting and dismounting it.This new model is slimmer and lighter than comparable models. The SAMO is available with rings (25.4/26 mm, 30 mm, 34 mm, 36 mm and 40 mm), for Zeiss rail, Swarovski SR rail, Doctersight (also identical models), Aimpoint Micro H1/H2, Trijicon MRO and with Picatinny/Weaver rail. Details: High accuracy recoilproof Made of steel Flat mounting Slim and lightweight Special feature of the version for the Doctersight: With a height of just 3.5 mm, it is probably the flattest scope mount in its segment in the world.   Special feature of the version for Swarovski SR rail: Here the teeth are milled from solid steel - and not from a plastic inlay as in the original Blaser scope mount. This is a significant improvement over the original!   Hint: Please note that the pictures are only exemplary and the accessories, in this case the rifle as well as the target optics, are not sold.

HMS SAMO mount for Blaser - Swarovski SR rail - a first class mount. The Henneberger SAMO mount was designed as a cost-effective and first-class alternative for Blaser rifles. The HMS SAMO has detailed solutions which are better than the original. For example, the serration of the mount for Swarovski SR rail is milled from the solid. In addition, the adjustment screw for adjusting the holding force is provided with a TORX nut instead of the Mherfach slotted nut. This allows for much easier adjustment with standard tools (Torx wrench). Details: high quality assembly MADE IN GERMANY accurately manufactured on CNC machines Clamping nut with TORX drive toothing of the Swarovski SR rail milled from the solid suitable for Blaser rifles suitable for Swarovski SR rail

Innomount quick detachable scope mount for Blaser - Swarovski SR-Rail The Innomount quick release mount for Blaser hunting rifles is a solid connection between rifle and optics. Innomount attaches great importance to the highest manufacturing quality. The assembly is not only an inexpensive alternative to the original Blaser saddle mount, but it also has innovative detail solutions. Due to the uniform mounting of all newer Blaser hunting rifles, this mounting naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. The quick-release mount is repeatable and has innovative quick-release fasteners. These work reliably and are easy to operate. When closed, they also lie in the housing - so they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. The use of 3 sliding blocks in combination with the innovative Swarovski SR rail for attaching the rifle scope ensures a reliable hold of the optics on the rifle scope mounting. This is also the case when using recoil-strong big game rifles, since the Swarovski SR rail transmits the recoil forces positively between the scope and the mount due to its approx. 2 mm teeth on the underside.   Details: Clamping lever with protection against unintentional opening repeatable suitable for Blaser rifles suitable for Swarovski SR Rail Overall height: 10 mm Type number: 50-SR-10-00-800

Innomount quick detachable scope mount for Blaser - Swarovski SR-Rail The Innomount quick release mount for Blaser hunting rifles is a solid connection between rifle and optics. Innomount attaches great importance to the highest manufacturing quality. The assembly is not only an inexpensive alternative to the original Blaser saddle mount, but it also has innovative detail solutions. Due to the uniform mounting of all newer Blaser hunting rifles, this mounting naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. The quick-release mount is repeatable and has innovative quick-release fasteners. These work reliably and are easy to operate. When closed, they also lie in the housing - so they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. The use of 3 sliding blocks in combination with the innovative Swarovski SR rail for attaching the rifle scope ensures a reliable hold of the optics on the rifle scope mounting. This is also the case when using recoil-strong big game rifles, since the Swarovski SR rail transmits the recoil forces positively between the scope and the mount due to its approx. 2 mm teeth on the underside. The scope mount with "BH 20" can be used with your overall height of 20 mm as a rifle scope mounting for the use of special optics like thermal or NV optics.   Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Swarovski SR Rail Overall height: 20 mm Type number: 50-SR-20-00-800

Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder.   Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).

Innomount Zero for Blaser - Swarovski SR rail The Innomount Zero quick release mount for Blaser hunting rifles is a solid connection between rifle and optics. With the new Zero locking mechanism, you screw the mount onto the rifle and then press the lever to mount - this decouples it and prevents it from operating the bolt mechanism. To release the mount again, pull the lever towards you, this couples it in the breech mechanism and now the breech can be released again. A very reliable and safe method. Innomount attaches great importance to the highest manufacturing quality. The mount is not only an inexpensive alternative to the original Blaser saddle mount, but it also features innovative detail solutions. By the uniform admission of all newer Blaser hunting rifles fits this mounting of course on all Blaser weapons such as the R8, R93, K95, D99, BF97 or the triplet BD14. The use of 3 sliding blocks in combination with the innovative Swarovski SR rail for mounting the scope ensures a reliable hold of the optics on the scope mount. Even when using high recoil big game rifles, as the Swarovski SR rail transfers the recoil forces positively between the scope and the mount due to its approx. 2mm serrations on the underside.   Details: "Zero" locking mechanism highly accurate suitable for Blaser suitable for Swarovski SR rail height: 10 mm type number: 40-SR-10-00-800

Innomount Zero - Blaser - Swarovski - 14 mm height The Innomount Zero mount for Blaser hunting rifles is a solid connection between rifle and optics. Innomount attaches great importance to the highest manufacturing quality.  The quick-release assembly is repeatable and features innovative quick-release fasteners. This special version with an overall height of 14 mm is ideal for the use of special optics. The mounting is suitable for Swarovski rifle scopes with SR-rail.   Details: ZERO-locking mechanism repeatable suitable for Blaser suitable for Swarovski SR-rail Overall height: 14 mm Type Number: 40-SR-14-00-800

Assembling Screw for Blaser saddle scope mount (Swarovski SR -Rail / Zeiss VM-Rail) The replacement screws for Blaser saddle mount with Swarovski SR-rail or Zeiss VM-Rail. As a replacement or spare part for lost or damaged screws. Since there are several versions, please make sure you check the compatibility! For assembly, we recommend using Loctite 243 and a torque wrench.   Details: screw DIN 7984 M4x8 Steel 8.8, black Hexagon socket Recommended max. torque: 3.0 Nm

The LED illuminated front sight for your rifle - shooting with open sights until the dark This LED-Sight allows for shooting accurately under the most adverse light conditions with a simple turn of a a button. Recoil proof, tough, reliable, for the most demanding hunts. Seeing is believing!   advantages of the LED-Sight compared against other options: While using a rifle scope, You carry the LED-Sight always on your rifleå«s barrel, while red dots wonå«t be on place when You suddenly need them. Completly waterproof and no optical side effects by glaring through the water like you have by some red dots The Classic edition works in daylight like a traditional black sight: passive without any battery. When You turn the LED on, it plays out itå«s advantages: perfect aiming conditions, even under worst light conditions! (For mainly daylight use, please check the "Day&Nightfire" ore "Firefly" - as those work in sunlight like a fibre sight as well. Very cheap compared to other options like red-dots or scopes Perceft for driven hunts and follow-ups of wounded game...   details: easy 1:1 exchange with most rifles: Blaser R93 / Blaser R8 / Blaser K95 / Sauer 202 & 303 & 404 / Heym SR 21 & 30 / Mauser M03, Mauser M12, and many more With all other rifles: all needed is a potrusion bolt on the barrel battery works about 10-12 hours Sight is hight adjustable reduncy: without battery, it works like a classicåÊblack sight   manuals for download: Gebrauchsanleitung-deutsch-1-0 (German) Manual-for-LED-Sight (English) Mode-d-EmployåÊ(French)

With the LED illuminated front sight for Your hunting rifle, we have pushed the performance of using open sights untill night! - so it is a perfect tool for hunting on driven hunts, follow ups and anything, but the worst light and weather conditions With our latest LED-Sight "Firefly" we have illuminated the whole bead of the front sight - this results in an easier-to-use then our first editions of the LED-Sights "Classic" or "Day&Nightfire" (with those there is just a small dot of the bead illuminated!) and a much higher light output - so day light visibility has increased very much! It interacts also with a broader range of rear sights then the old editions. In daylight, the LED-Sight "Firefly" could be used like a normal fibre sight as it´s plastic material is light gathering and self-illumnating under the sun. But as soon as You switch the LED on, You have an active illuminated front sight, allowing You to aim & shoot under the worst light conditions easily (untill darkness!) - which You can´t perform with any other open sights! The battery (Battery BR 435) runs up to 15 hours. The housing is waterproof sealed. The sight is height adjustable. 1:1 exchange with most rifles - and in worst case just a potrusion bolt is required - which is not a big task for any serious gunsmith!   1:1 exchange is possible with this type of guns (if not a special edition): Blaser R93 Blaser R8 Blaser K95 Heym SR 30 Heym SR 21 Mauser M03 Mauser M12 Sauer 202 Sauer 303 Sauer 404 u.v.m. and with an adaptor also with this type of guns Benelli Browning Rößler Remington Sako Tikka   Technical Details: Length: 78 mm Height of Base: 14 mm max. height of the bead over the base: 6 mm Weight with battery: ca. 12 g   Hint: With the editions "Firefly" and "Chamäleon" You don´t need to place the bolt ( #10 in the manual) between the spring while assembling the LED-Sight on your rifle.   Gebrauchsanleitung-deutsch-1-0 (please download here) Manual-for-LED-Sight (English) Mode-d-Employ (French)   Comparing the different modells (left to right: Day&Nightfire, Chamäleaon, Firefly)       Comparing Chamäleon (left) and Firefly (right) in daylight and at night conditions