HMS Samo
From
€325.00*
HMS SAMO - An alternative scope mount for all weapons with Blaser saddle mounts
The Henneberger montages are the inexpensive but high quality connection between rifle scopes and weapon. The SAMO system, milled from solid steel, is absolutely recoilproof and without any change of the POI while mounting and dismounting it.This new model is slimmer and lighter than comparable models.
The SAMO is available with rings (25.4/26 mm, 30 mm, 34 mm, 36 mm and 40 mm), for Zeiss rail, Swarovski SR rail, Doctersight (also identical models), Aimpoint Micro H1/H2, Trijicon MRO and with Picatinny/Weaver rail.
Details:
High accuracy
recoilproof
Made of steel
Flat mounting
Slim and lightweight
Special feature of the version for the Doctersight: With a height of just 3.5 mm, it is probably the flattest scope mount in its segment in the world.
Special feature of the version for Swarovski SR rail: Here the teeth are milled from solid steel - and not from a plastic inlay as in the original Blaser scope mount. This is a significant improvement over the original!
Hint:
Please note that the pictures are only exemplary and the accessories, in this case the rifle as well as the target optics, are not sold.
Innogun Quick Release Mount for Blaser - Picatinny
€329.00*
Innomount quick detachable scope mount for Blaser - Picatinny Rail
This Innomount quick-release mount has an integrated Pictianny rail on the upper side and is therefore ideally suited for mounting driven hunt sights, red dot sights or other accessories using the Weaver or Pictinny mount.
Due to the uniform mounting of all newer Blaser hunting rifles, this mount naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14.
Details:
Clamping lever with protection against unintentional opening
repeatable accuracy
made of steel
suitable for Blaser
with a Picatinny Rail on top
Overall height: 20 mm
Type number: 50-PT-20-00-800
Innogun Quick Release Mount for Blaser - Picatinny Long
€329.00*
Innomount quick detachable scope mount for Blaser - Picatinny Rail Long
This Innomount quick-release mount has an integrated Pictianny rail in an extra long design on the upper side and is therefore ideally suited for mounting driven hunt sights, red dot sights, night vision technology or other accessories using the Weaver or Pictinny mount.
Due to the uniform mounting of all newer Blaser hunting rifles, this mount naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14.
Details:
Clamping lever with protection against unintentional opening
repeatable accuracy
made of steel
suitable for Blaser
with an extra long Picatinny rail on the top side
Overall height: 20 mm
Total Length: 205 mm
Type number: 50-PT-20-100-800
Innomount BG-1/4 inch torque screwdriver 0.8 - 6 Nm
€59.00*
Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes
"Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder.
Note:
For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).
Innomount Fixed Mount for Blaser - Picatinny
€259.00*
Innomount Fixed Mount for Blaser - Picatinny
This Innomount mount has an integrated Pictianny rail on the upper side and is therefore ideally suited for mounting driven hunt sights, red dot sights or other accessories using the Weaver or Pictinny mount.
This mounting is intentionally fixed and can only be fixed or dismounted with a Torx key.
Due to the uniform mounting of all newer Blaser hunting rifles, this mounting naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14.
Details:
Fixed mounting - fastening with Torx key
repeatable accuracy
made of steel
suitable for Blaser rifles
with a Picatinny rail on top
Overall height: 12 mm
Type number: 53-PT-12-00-800
Innomount Quick Release Mount for Blaser (slight long) - Picatinny
€249.00*
Innomount quick detachable scope mount for Blaser rifles (slight long) - Picatinny
The Innomount quick detachable "Slight Long" is a minimalist rifle scope mount for the use of red dot optics or Weaver-adaptive accessories on your Blaser hunting rifle. Innomount attaches great importance to the highest manufacturing quality and innovative details.
The assembly is milled from one piece and has quick release levers for fastening.
Details:
Clamping lever with protection against unintentional opening
repeatable accuracy
made of steel
suitable for Blaser rifles
Picatinny Rail on the upper side
Overall height: 12 mm
Type number: 52-PT-12-00-800
LED-Sight 1st Generation Classic
€27.95*
LED-Sight 1st generation Classic: buy remaining stock cheaply
The LED-Sight 1st generation Classic is only available in our online shop "while stocks last". Because for this model series we carry only remainders, which are now offered particularly favorably.
All highlights at a glance:
Battery lasts approx. 10 to 12 hours
Redundancy: can be used like a normal grain in case of battery failure
Height-adjustable luminous grain
compatible with many hunting rifles, including Blaser R93, Heym SR 30, Mauser M03 and Sauer 202
Can be used on other weapons using a potrusion-bolts
Price unbeatable: Access now!
The 1st generation of the Classic illuminated fron sights was characterised by the fact that it was operated with a light emitting diode for the first time and the open sight could therefore be used independently of daylight. At the same time, the Classic LED sight also functions passively just like the regular sight when the LED is not switched on. The LED-Sight is attractive compared to red dot sights - because they cost considerably less.
Is the 1st generation Classic LED beacon the right choice? We will be happy to advise you by telephone. You can reach us at +49-6071-922765.
Instructions for use for download:
Gebrauchsanleitung-deutsch-1-0 (bitte klicken)
Manual-for-LED-Sight (English)
Mode-d-Employ (French)