Fibre Insert for Blaser R93 Rifles (yellow-green) The bead shines bright yellow/green in daylight. This fibre insert is to replace the "normal" black bead of the Blaser R93 rifle for a better aiming performance. The dimensions are about: 2,75mm x 11,0 mm x 14,1 mm   Hint: Does not fit the Blaser R8 rifles! Therefor please check the LED-Sight, which fits both: Blaser R8 and R93 and many other type of rifles Only the bead insert is beeing delivered, the pictures shows it´s use on the base.

HMS SAMO - An alternative scope mount for all weapons with Blaser saddle mounts The Henneberger montages are the inexpensive but high quality connection between rifle scopes and weapon. The SAMO system, milled from solid steel, is absolutely recoilproof and without any change of the POI while mounting and dismounting it.This new model is slimmer and lighter than comparable models. The SAMO is available with rings (25.4/26 mm, 30 mm, 34 mm, 36 mm and 40 mm), for Zeiss rail, Swarovski SR rail, Doctersight (also identical models), Aimpoint Micro H1/H2, Trijicon MRO and with Picatinny/Weaver rail. Details: High accuracy recoilproof Made of steel Flat mounting Slim and lightweight Special feature of the version for the Doctersight: With a height of just 3.5 mm, it is probably the flattest scope mount in its segment in the world.   Special feature of the version for Swarovski SR rail: Here the teeth are milled from solid steel - and not from a plastic inlay as in the original Blaser scope mount. This is a significant improvement over the original!   Hint: Please note that the pictures are only exemplary and the accessories, in this case the rifle as well as the target optics, are not sold.

Innomount quick detachable scope mount for Blaser - Ring Mount The Innomount quick detachable scope mount offers a classic rifle scope assembly using rings. Rings of 26, 30, 34, 35, 36 or 40mm diameter are available. In addition, there are 3 different heights for each diameter. The "base" remains the same, the rings are offered in different heights and are securely bolted to the base using a pivot pin. The scope mount has quick-release fasteners which are secured against unintentional opening. Due to the uniform mounting of all newer Blaser hunting rifles, this mount naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. Height: Rings (standard) in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 14 mm Rings BH+3 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 17 mm Rings BH+6 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 20 mm Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for mounting with rings of different diameters 20 MOA edition available for long range shooters Overall height: 14 / 17 or 20 mm  

Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder.   Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).

Innomount Multirail Picatinny Blaser This versatile mounting rail allows the use of Weaver/Picatinny mounts on the weapon as well as the use of a Blaser saddle mount on a Sauer, Remington, Browning BAR, Benelli or Tikka weapon. Since the Blaser saddle mount is extremely reliable, easy to mount and handle and very repeatable, it is now possible to use this first-class mount for a large number of rifles and at the same time, for example, use a red dot by means of Weaver mounting on the same weapon-side mounting base.   Details: hardened steel repeatable very versatile Weaver / Picatinny rail Mounts for Blaser saddle mounting  

Innomount Zero scope mount for Blaser - Ring Mount The Innomount Zero quick release mount for Blaser hunting rifles is a solid connection between the rifle and the optics. With the new Zero breech system, you screw the mount onto the rifle and then press the lever to the mount - this decouples it and prevents it from operating the breech mechanism. To release the mount again, pull the lever towards you, this couples it in the breech mechanism and now the breech can be released again. A very reliable and safe method. Due to the uniform mounting of all newer Blaser hunting rifles, this mount naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. Height: Rings (standard) in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 14 mm Rings BH+3 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 17 mm Rings BH+6 in 26 / 30 / 34 / 35 / 36 / 40 mm: Overall height = 20 mm Details: "Zero" locking mechanism repeatable suitable for Blaser rifles suitable for mounting with rings of different diameters 20 MOA edition available for long range shooters Overall height: 14 / 17 or 20 mm  

With the LED illuminated front sight for Your hunting rifle, we have pushed the performance of using open sights untill night! - so it is a perfect tool for hunting on driven hunts, follow ups and anything, but the worst light and weather conditions With our latest LED-Sight "Firefly" we have illuminated the whole bead of the front sight - this results in an easier-to-use then our first editions of the LED-Sights "Classic" or "Day&Nightfire" (with those there is just a small dot of the bead illuminated!) and a much higher light output - so day light visibility has increased very much! It interacts also with a broader range of rear sights then the old editions. In daylight, the LED-Sight "Firefly" could be used like a normal fibre sight as it´s plastic material is light gathering and self-illumnating under the sun. But as soon as You switch the LED on, You have an active illuminated front sight, allowing You to aim & shoot under the worst light conditions easily (untill darkness!) - which You can´t perform with any other open sights! The battery (Battery BR 435) runs up to 15 hours. The housing is waterproof sealed. The sight is height adjustable. 1:1 exchange with most rifles - and in worst case just a potrusion bolt is required - which is not a big task for any serious gunsmith!   1:1 exchange is possible with this type of guns (if not a special edition): Blaser R93 Blaser R8 Blaser K95 Heym SR 30 Heym SR 21 Mauser M03 Mauser M12 Sauer 202 Sauer 303 Sauer 404 u.v.m. and with an adaptor also with this type of guns Benelli Browning Rößler Remington Sako Tikka   Technical Details: Length: 78 mm Height of Base: 14 mm max. height of the bead over the base: 6 mm Weight with battery: ca. 12 g   Hint: With the editions "Firefly" and "Chamäleon" You don´t need to place the bolt ( #10 in the manual) between the spring while assembling the LED-Sight on your rifle.   Gebrauchsanleitung-deutsch-1-0 (please download here) Manual-for-LED-Sight (English) Mode-d-Employ (French)   Comparing the different modells (left to right: Day&Nightfire, Chamäleaon, Firefly)       Comparing Chamäleon (left) and Firefly (right) in daylight and at night conditions