Jakele Kammergriffkugel Aluminium, schwarz, harteloxiert, mit 2-goldfarbenen Fäden

Innomount quick detachable scope mount for Blaser rifles (slight long) - Aimpoint Micro The Innomount Slight Long is a minimalist and reliable rifle scope mount for the Aimpoint Micro. Due to the low overall height of only 6 mm and the Innogun-typical quick-release fasteners, the assembly is virtually predestined for use in the next driven hunt. The mounting on the upper side is suitable for the Aimpoint Micro H1 / H2 / T2 red point target optics as well as for the identical Holosun device.   Details: Clamping lever with protection against unintentional opening repeatable accuracy made of steel suitable for Blaser suitable or Aimpoint Micro / Holosun Overall height: 6 mm Type number: 52-AM-06-00-800    

HMS SAMO - An alternative scope mount for all weapons with Blaser saddle mounts The Henneberger montages are the inexpensive but high quality connection between rifle scopes and weapon. The SAMO system, milled from solid steel, is absolutely recoilproof and without any change of the POI while mounting and dismounting it.This new model is slimmer and lighter than comparable models. The SAMO is available with rings (25.4/26 mm, 30 mm, 34 mm, 36 mm and 40 mm), for Zeiss rail, Swarovski SR rail, Doctersight (also identical models), Aimpoint Micro H1/H2, Trijicon MRO and with Picatinny/Weaver rail. Details: High accuracy recoilproof Made of steel Flat mounting Slim and lightweight Special feature of the version for the Doctersight: With a height of just 3.5 mm, it is probably the flattest scope mount in its segment in the world.   Special feature of the version for Swarovski SR rail: Here the teeth are milled from solid steel - and not from a plastic inlay as in the original Blaser scope mount. This is a significant improvement over the original!   Hint: Please note that the pictures are only exemplary and the accessories, in this case the rifle as well as the target optics, are not sold.

Innomount quick detachable scope mount for Blaser - Swarovski SR-Rail The Innomount quick release mount for Blaser hunting rifles is a solid connection between rifle and optics. Innomount attaches great importance to the highest manufacturing quality. The assembly is not only an inexpensive alternative to the original Blaser saddle mount, but it also has innovative detail solutions. Due to the uniform mounting of all newer Blaser hunting rifles, this mounting naturally fits all Blaser rifles such as the R8, R93, K95, D99, BF97 or the Drilling BD14. The quick-release mount is repeatable and has innovative quick-release fasteners. These work reliably and are easy to operate. When closed, they also lie in the housing - so they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. The use of 3 sliding blocks in combination with the innovative Swarovski SR rail for attaching the rifle scope ensures a reliable hold of the optics on the rifle scope mounting. This is also the case when using recoil-strong big game rifles, since the Swarovski SR rail transmits the recoil forces positively between the scope and the mount due to its approx. 2 mm teeth on the underside.   Details: Clamping lever with protection against unintentional opening repeatable suitable for Blaser rifles suitable for Swarovski SR Rail Overall height: 10 mm Type number: 50-SR-10-00-800

With the LED illuminated front sight for Your hunting rifle, we have pushed the performance of using open sights untill night! - so it is a perfect tool for hunting on driven hunts, follow ups and anything, but the worst light and weather conditions With our latest LED-Sight "Firefly" we have illuminated the whole bead of the front sight - this results in an easier-to-use then our first editions of the LED-Sights "Classic" or "Day&Nightfire" (with those there is just a small dot of the bead illuminated!) and a much higher light output - so day light visibility has increased very much! It interacts also with a broader range of rear sights then the old editions. In daylight, the LED-Sight "Firefly" could be used like a normal fibre sight as it´s plastic material is light gathering and self-illumnating under the sun. But as soon as You switch the LED on, You have an active illuminated front sight, allowing You to aim & shoot under the worst light conditions easily (untill darkness!) - which You can´t perform with any other open sights! The battery (Battery BR 435) runs up to 15 hours. The housing is waterproof sealed. The sight is height adjustable. 1:1 exchange with most rifles - and in worst case just a potrusion bolt is required - which is not a big task for any serious gunsmith!   1:1 exchange is possible with this type of guns (if not a special edition): Blaser R93 Blaser R8 Blaser K95 Heym SR 30 Heym SR 21 Mauser M03 Mauser M12 Sauer 202 Sauer 303 Sauer 404 u.v.m. and with an adaptor also with this type of guns Benelli Browning Rößler Remington Sako Tikka   Technical Details: Length: 78 mm Height of Base: 14 mm max. height of the bead over the base: 6 mm Weight with battery: ca. 12 g   Hint: With the editions "Firefly" and "Chamäleon" You don´t need to place the bolt ( #10 in the manual) between the spring while assembling the LED-Sight on your rifle.   Gebrauchsanleitung-deutsch-1-0 (please download here) Manual-for-LED-Sight (English) Mode-d-Employ (French)   Comparing the different modells (left to right: Day&Nightfire, Chamäleaon, Firefly)       Comparing Chamäleon (left) and Firefly (right) in daylight and at night conditions    

Z8i 2,3-18x56 P by Swarovski Optik for hunting after twilight & long distance shots With a lens diameter of 56 mm, the Z8i 2.3-18x56 P is the riflescope with the highest light gathering ability from Swarovski Optik. This provides excellent images even in poor light conditions and at the same time high magnification and, in conjunction with 18x magnification, enables precise shots at a big distance.   All highlights at a glance: 8x zoom 18x magnification good field of view (18 m) highest light transmission (93 %) finely dimmable illuminated reticle with automatic switch-off HD lenses uncompromising image sharpness and detail recognition parallax setting   Optional for the Z8i models: SR rail for easy and stress-free mounting available flexible ballistic turret (model BTF can be mounted at any time without tools)   Powerful rifle scope with brilliant optics Especially at dusk on the hide and during night hunting for wild boar, a powerful rifle scope is a great advantage. The Z8i 2.3-18x56 P has a 56 mm lens diameter, which provides plenty of light. At the same time, the light transmission is 93%. In combination with the standard HD lenses, the result is a first-class image - true to colour, rich in contrast, razor sharp and bright. Even in adverse light and weather conditions, the Z8i 2.3-18x56 P offers a bright view. Thanks to 18x magnification, even the smallest details can be seen from a distance. This creates the ideal conditions for a precise long-range shot when hunting from the hide, treestand or in other hunting situations. The model is available with the following reticle variants: BRX-I, 4A-l, 4A-300-l and 4W-l.   Can be mounted on many hunting rifles, tension-free with SR rail The Z8i line is also equipped with a 30 mm centre tube as standard. Compared to other, comparable target optics of well-known manufacturers, the Z8i is already quite slim and can be mounted on a variety of hunting rifles. Swarovski Optik offers the Z8i 2.3-18x56 P with SR mounting rail for absolutely recoil-proof and reliable, tension-free mounting.   Can we help you? If you still have questions about the Z8i 2.3-18x56 P from Swarovski Optik or need general support in selecting a suitable target optic, simply give us a call. You can reach us during business hours at +49-6071-622765. We will be happy to advise you personally and comprehensively.