Kahles Helia TI35 Thermal Image

Product information "Kahles Helia TI35 Thermal Image"

Kahles Helia TI 35 thermal imager - radically simple, radically sophisticated

With the Helia TI 35 thermal imager, Kahles enters a new era of hunting strategy and equipment and has developed a product that allows uncompromisingly simple and fast observation - during the day and at night.

The highlights of the Kahles Helia TI 35 thermal imager at a glance.

  • 2.3x magnification (optical), 1x, 2x and 4x magnification (digital)
  • 35 mm objective lens diameter
  • Field of view (19 m / 100 m)
  • Sensor size 384x288 pixels, 17 μm
  • Sensor type: vanadium oxide uncooled focal plane arrays
  • Thermal resolution NETD <35 mK
  • Approx. 430 g
  • 198 mm length
  • 63 mm height
  • 50 Hz refresh rate
  • OLED Screen type
  • 1,024×768 pixel screen resolution
  • 2 seconds power-on time
  • Operating temperature -20°C to +50°C
  • Lithium-ion battery
  • 8 h operating time battery
  • 3 color modes
  • Waterproof and shockproof

Included

The Helia TI 35 thermal imager comes with USB-C charging cable, carrying strap with quick-release buckle, eyepiece protection cap and neoprene protective cover.

Radically simple to operate for uncompromising responsiveness.

With just two control buttons on the top of the unit and a two-second boot-up time, the Helia TI 35 thermal imager from Kahles is radically easy to use. Kahles limits the innovative hunting equipment to the essentials, so you only need to be familiar with the absolutely relevant features when hunting. No operating element is too much. None interferes with the use of the Helia TI 35.
The intelligent automatic on/off display responds to the position of the thermal imager. The tilt and motion sensor immediately registers whether you want to bring the Helia TI 35 thermal imager to your eyes and capture your surroundings. At the same time, the display turns off so there are no distracting light sources when not in use. With this in mind, the Helia TI 35's Li-ion battery is energy-efficient with up to eight hours of runtime (in continuous operation).

Never miss a detail thanks to high image resolution

Thanks to the high detail detection and high imaging resolution of 1024 x 768 pixels, you can precisely explore the field of view and locate heat sources (game). Via the 2.3x optical magnification and the digital zoom (1x, 2x, 4x) you can get very close to your surroundings. The reduced menu allows you to adjust contrast, brightness, automatic light and screen calibration to the individual hunting situation. You can switch between the three color modes White Hot, Black Hot and Only Red in a flash thanks to the quick settings and won't miss anything in your field of view.

Ergonomic design for uncompromising observation

When observing with the Kahles Helia TI 35, you don't have to compromise - even when you're out for several hours or in adverse conditions. The design is based on an ergonomic shape with non-slip armoring. This enables fatigue-free viewing even over longer periods of time. The operating elements have been placed on the upper side for ease of use and intuitive, quick observation. According to the manufacturer, the robust housing prevents drops, impacts, moisture or extreme temperatures from affecting the function of the Helia TI 35.

Feel free to ask us your questions about the product!

The Kahles Helia TI 35 is intentionally a thermal imager with reduced features and a user-friendly design so that the user can quickly address the game around them with focus while hunting and not be distracted by unnecessary controls or functions. If you have any questions about this product or other hunting equipment, please do not hesitate to contact us by phone or e-mail.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Ähnliche Artikel

Swarovski tM 35 Thermal Image
Swarovski tM 35 thermal image for observation and as an attachment device The Swarovski tM 35 combines state-of-the-art technology with practical functions: The innovative product is a latest-generation thermal imaging device usable both as an observation device and as an attachment in combination with a riflescope - thus allowing you to literally turn night into day. Especially for night hunting of wild boar, the tM35 offers a high-quality complete solution for the passionate hunter. The highlights of the tM 35 thermal imager at a glance● 1x magnification (optical), 4x magnification (digital). 35 mm lens diameter Field of view (10.9 x 8.7 m / 100 m) 100 % field of view for eyeglass wearers 21 mm exit pupil Approx. 495 g 170 mm length, 80 mm height 60 Hz refresh rate Amoled screen type 2560 x 2048 pixel screen resolution 2 seconds power-on time Operating temperature -15°C to +50°C Storage temperature -30°C to +70°C 3000 mAh Li-Ion battery 7 h battery operating time Recoil tested with the same criteria as all Swarovski target optics Maximum point-of-impact shift with the tMA clamping adapter after reattaching the entire system with a Swarovski 4 cm riflescope (Shooting in is not necessary. The reticle of the riflescope is used). Battery can be effortlessly replaced (even in the dark) with a spare battery. Optional for the tM 35 thermal image RB tM 35 rechargeable battery as a replacement battery. tMA clamping adapter for tM 35 for repeatable mounting on the scope. Included The tM 35 thermal imager comes with RB tM 35 battery, RBC charger, micro USB charging cable, functional pouch, side light shield, carrying strap, hand strap, eyepiece cover and integrated eyepiece cover. tM 35 thermal imager meets the demands of modern hunting With the t line, from which the new thermal imager comes, Swarovski Optik enters a new era: The clever use of thermo-optical hunting equipment. It goes without saying that the tM 35 thermal imager offers the highest optical quality on a Swarovski scale. It combines observation and sighting device in one precise technology and thus meets the demands of modern hunting: Respectful observation and safe target acquisition - both by day and by night, thanks to the Black Hot / White Hot mode. Reliable, sustainable, hunter-friendly - these are the new attributes of the hunting era with the tM 35 thermal imager. Flexible in use - the tM35 thermal imaging device Probably the greatest highlight of the tM35 is that it combines an observation and sighting device in one. This gives the hunter a wide range of possible applications. Whether you want to observe, detect, target or aim: The tM35 is always with you. In observation mode, it offers 4 x 35 magnification. For higher detail detection depending on the situation, you can switch between White Hot (usually the default setting for day and twilight) and Black Hot (often preferred for night) modes. Especially in adverse weather conditions, at dusk or at night, the strengths of the new tM35 thermal imager come into their own. Accurate on the hunt - tM 35 as an attachment With the matching tMA clamping adapter, you can quickly convert the tM35 thermal imager into an attachment and place it in front of your target optics. Swarovski Optik promises that the tM35 is compatible with all riflescopes in the Z8(i), Z6i, Z5(i) and Z3 series (with the exception of the Z8i 1-8x24 driven hunt riflescope with SR rail). As an attachment, the tM35 offers 1x magnification and, in combination with the user's own riflescope, ensures accurate sighting. Of course, your own sighting optics can be set to a higher magnification. However, we recommend a maximum of 8x magnification for hunting practice, otherwise you will see the pixels on the display of the attachment. The tM35 can be mounted as an attachment with repeatable accuracy using the tMA clamping adapter. Simple operation for hunting success Too many manual operations can stand in the way of hunting success. This made it all the more important for Swarovski Optik to keep the operation of the tM35 thermal imager as simple as possible. It is therefore not surprising that only a single push of a button is all that is needed to activate the observation and sighting device for the entire hunting season. The integrated SWAROLIGHT automatic on/off function supports hunting success and quickly and silently switches from rest to active mode or vice versa as soon as you pick up the weapon and bring it into a vertical position for firing. The display automatically adjusts its brightness to the environment, so you can keep your movements, and therefore noise, to a minimum. Benefits of thermal imaging technology for hunting Thermal imaging is an exciting topic among hunting enthusiasts, and it's not uncommon for it to generate a lot of discussion. At this point, we would like to take another look at the advantages of thermal imaging technology for hunting. Thermal imaging devices such as the tM 35 make heat sources (game) immediately detectable - regardless of the distance. This increases the chance of a faster, more reliable response and an accurate shot even in complete darkness. Since thermal imagers display images using temperature differences and operate without light, they can easily be used during the day as well as at night - or even in complete darkness. Although you can basically capture more details of the object with a night vision device, the tM 35 delivers excellent images with a screen resolution of 2560 x 2048 pixels (320 x 256 px sensor resolution). Please feel free to contact us for a personal consultation! The Swarovski tM 35 thermal imager has aroused your curiosity? We would be happy to advise you personally on the new highlights from Swarovski. You can reach us during opening hours at 06071 922765 or send us an e-mail with your questions. We would like to point out at this point that the general conditions for the purchase, possession and use of thermal imaging technology depend on the respective applicable weapons and hunting laws. Therefore, please inform yourself in advance about the applicable regulations in your country / state.   The Swarovski tM35 will be available from spring 2022! Preorders could be placed yet.

€2,565.00*
Kahles Helia 8x42 RF
Kahles Helia 8x42 RF - A simple binocular with distance measurement for hunting  The particularly ergonomic and high quality Helia 8x42 RF binoculars are simple and easy to handle. It has some very useful hunting functions. On the one hand the distance to the game can be measured very reliably. There is a single measurement mode and a scan mode. On the other hand, the binoculars have the patented EAC function for angle correction. Details: High-quality optics Simple and intuitive menu navigation 5 manual light levels in OLED display Distance measurement (LR) up to 4500 m Normal meassurements 5-1500 m Long battery life (approx. 4000 measurements)  

€1,350.00*