Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder.   Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).

Innomount spare parts set 4x sliding block for Zeiss rail Sometimes one gets lost or you want to use new ones when remounting. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Zeiss rail delivery amount: 4 pieceM4 thread

Sliding Block for Zeiss rail - as a replacement for your riflescope mount Sometimes one gets lost or you want to use new ones when remounting - that's why we offer the sliding blocks for the Zeiss rail as a spare part individually. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Zeiss rail delivery amount: 1 pieceM4 thread

Sliding Block for Swarovski SR rail - as a replacement for your riflescope mount Sometimes one gets lost or you want to use new ones when remounting - that's why we offer the sliding blocks for the Swarovski SR rail as a spare part individually. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Swarovski SR rail delivery quantity: one pieceM4 thread