Innomount BG-1/4 Zoll Drehmoment - Schraubendreher

Innomount BG-1/4 inch torque screwdriver 0.8 - 6 Nm

Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder. Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).

€59.00*

Innomount spare parts set 4x sliding block for Swarovski SR rail

Innomount spare parts set 4x sliding block for Swarovski SR rail Sometimes one gets lost or you want to use new ones when remounting the whole set.When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Swarovski SR rail delivery quantity: 4 piecesM4 thread

€28.00*

Innomount spare parts set 4x sliding block for Zeiss rail

Innomount spare parts set 4x sliding block for Zeiss rail Sometimes one gets lost or you want to use new ones when remounting. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Zeiss rail delivery amount: 4 pieceM4 thread

€28.00*

Sliding Block for Swarovski SR rail

Sliding Block for Swarovski SR rail - as a replacement for your riflescope mount Sometimes one gets lost or you want to use new ones when remounting - that's why we offer the sliding blocks for the Swarovski SR rail as a spare part individually. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Swarovski SR rail delivery quantity: one pieceM4 thread

€9.50*

Sliding Block for Zeiss rail

Sliding Block for Zeiss rail - as a replacement for your riflescope mount Sometimes one gets lost or you want to use new ones when remounting - that's why we offer the sliding blocks for the Zeiss rail as a spare part individually. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Zeiss rail delivery amount: 1 pieceM4 thread

€9.50*

Screws for Blaser Saddle Mount

Assembling Screw for Blaser saddle scope mount (Swarovski SR -Rail / Zeiss VM-Rail) The replacement screws for Blaser saddle mount with Swarovski SR-rail or Zeiss VM-Rail. As a replacement or spare part for lost or damaged screws. Since there are several versions, please make sure you check the compatibility! For assembly, we recommend using Loctite 243 and a torque wrench. Details: screw DIN 7984 M4x8 Steel 8.8, black Hexagon socket Recommended max. torque: 3.0 Nm

€1.75*

Screws for Aimpoint Micro H2

Assembling screw for Aimpoint Micro H2 - DIN 912 M3x4 The matching screws for mounting an Aimpoint Micro H2 & H1 on most rifle scope mounts. As a replacement for lost or damaged screws. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screws. Details: screw DIN 912 M3x4 Steel 8.8, black Hexagon socket Recommended max. torque: 1.3 Nm

€1.70*

Spare parts and accessories for rifle scope mounts

Here you will find screws, slotted nuts, tools, torque wrenches, and much more so that you can equip your weapon with a rifle scope.

Filter products

Spare parts and accessories for rifle scope mounts