Lupine C14 Mag International - the first bike taillight with magnetic mount. The Lupine C14 Mag International has a 45 lumen rear light, integrated brake light and brightness sensor and in the International version can also be used a blink and pulse mode (to be seen better). The housing is milled from aluminum. The bicycle tail light is attached via an adapter plate milled from aluminum, which is attached between the saddle stays (standardized distance approx. 35 mm). To this it is then only magnetically "docked", which holds rock solid, but especially in Satdt traffic can be attached and removed again with a flick of the wrist when the bike is "parked". For attachment to carbon saddles, two additional screws are included. The C14 Mag is charged via a magnetic charging cable from the outside.   Note: We point out that the "C14 Mag International" has no STVZO approval and therefore may not be used in road traffic in the Federal Republic of Germany! The red light (International) may therefore only be used outside the scope of the German STVO! (i.e. abroad - but please also inquire there about the respective regulations).   Details: 80 lumen powerful bicycle tail light Aluminum housing, IP 68, IK 09 Weight 87g Dimensions: 71x40x26 mm Light duration 22 h max. charging time: 3h   Scope of delivery: C14 Mag saddle mount magnetic USB charging cable 2x additional screws for carbon saddles manual

Lupine SL Grano International - a lamp for outdoor and racing use The Lupine SL Grano International has a daytime running light of 150 lumens and two-stage low beam of 350 and 900 lumens light output. An ambient light sensor activates the dimmed low beam in automatic mode in the dark. In contrast to the StVZO version, the international version has three additional light modes: daytime, static and nighttime flash. The SL Grano is mounted directly below a bike computer (e.g. Garmin) using an existing Go-Pro mount.  Note: We would like to point out that the SL Grano INTERNATIONAL is not STVO approved and therefore may not be used in road traffic in the Federal Republic of Germany! The SL Grano (International) may therefore only be used outside the scope of the German STVZO! (i.e. abroad - however, please also inquire about the respective regulations there) Details: Housing milled from aluminum no StVZO approval 150 lumens daytime running light 350 & 900 lumens low beam USB-C connection (charger required) 17 Wh battery Charging time: approx. 2h 30 min Running time: max. 1h 45 min with low beam Running time: max. 12h daytime running light impact and water resistant according to IK09 and IPX6

Lupine Rotlicht Pro (International) – the smart safety light for outdoor and racing use The Lupine Rotlicht (international version) is a smart safety light with a brake light function. It can be individually programmed. Thanks to its light sensor, it can also be used as a brake light during the day and switches on automatically when it gets dark. Various light and flashing modes are available. The Rotlicht Pro has a holder for the seat post with a rubber band. With an optional seat post holder, the red light can also be used as a compact and very effective rear light on a bicycle (it is not approved for use on public roads!). The various flashing modes allow it to be adapted to the desired conditions. Note: We would like to point out that the “Rotlicht Pro” is not approved for use on public roads in Germany and therefore may not be used in road traffic in the Federal Republic of Germany! The Rotlicht Pro (International) may therefore only be used outside the scope of the German STVZO (i.e. abroad – please check the relevant regulations there as well). Details: Max. 120 lumens rear light (red) Aluminum housing, milled from solid aluminum Charging connection: USB-C Various flashing modes Brake light Individually programmable Brightness sensor IPX 6 (water resistance) IK 09 (impact resistance) Weight: 55g Dimensions: 31 x 32 x 60mm Light duration: min: 2:00 h / max. 40 h Scope of delivery: Lupine Red Light Pro (international)

Lupine SL Grano StVZO - a minimalist bike light for the road bike With the Lupine SL Grano you have an absolutely minimalist bike light with road approval in Germany! It has a 150 lumen daytime running light and two “low beam” levels with 350 & 900 lumen light output and a light sensor that automatically switches from daytime running light to night mode. Two status LEDs indicate the current light level as well as the battery status. The SL Grano is mounted directly below a bike computer (e.g. Garmin) using an existing Go-Pro mount. Details: Housing milled from aluminum StVZO approval 150 lumen daytime running light 350 & 900 lumen low beam USB-C connection (charger required) 17 Wh battery Charging time: approx. 2h 30 min Running time: max. 1h 45 min with low beam Running time: max. 12h daytime running light Impact and water resistant according to IK09 and IPX6

Lupine Seatrail Mount for Rotlicht - for assembling the Lupine red light to the bicycle The Lupine seatrail mount allows you to attach the Lupine Rotlicht to the seat rails if there is no space on the seat post. The Rotlicht is simply clicked into the mount from below. The seatrail mount ensures secure and tidy attachment in all situations and optimal positioning of the red light for maximum visibility in traffic. Details: Mechanical locking of the red light in the holder Includes crossbar and screwdriver 

Lupine SL Grano Titanium screw - Accessories for the SL Grano The titanium screw is used for tool-free mounting of the SL Grano International / StVZO lamp on an existing Go-Pro bracket. This means that the lamp can be mounted or dismounted quickly and without tools. Of course, this is high-end, but it is simply GEIL :-) and weighs almost nothing... In addition, the wing screw can be fastened with a Torx TX15. Note from the engineer: Especially with titanium threads, be sure to grease the thread (lubricating grease or copper paste) to keep it running smoothly and prevent damage.

Lupine Rotlicht Backpack Mount - For attaching your red light to backpack or bag With the Backpack Mount, the Lupine Rotlicht can be attached wherever a clip can be hooked in. For example, the red light can be easily mounted on the backpack due to lack of space on the bike.

Lupine SL Grano cable "Dauerbrenner" With the cable you can charge the SL Grano while driving from a powerbank or a Lupine battery with USB adapter (USB One). Scope of delivery: USB charging cable for SL Grano

Lupine USB Charger - USB C All Lupine batteries can easily be charged via USB Charger by USB-C chargers, computer or mobile phone power supply. The USB Charger works with almost any USB socket and in combination with a solar panel offers a very good solution to secure the power supply of your Lupine battery during long expeditions. Details: Charge current: 1,6 A Makes spontaneous charging on the move possible USB C connection

Lupine Garmin Aero Cockpit HolderA suitable display holder for Garmin, which can be mounted on aero handlebars and has a suitable Go-Pro mount on the underside, e.g. for the SL Grano. Other lights can be mounted using the matching Go-Pro mount. Details: suitable for Garmin suitable for aero handlebars integrated Go-Pro mount  made of high-quality aluminium alloy, black anodized precise CNC manufacturing for highest quality weight: approx. 30 g

Holder with swivelling ball head for attaching the laser to night vision devices. This type of mounting allows an exact alignment of the light cone to the object to be observed. Interface 1/4 inch tripod connection and Weaver/Picatinny

Lupine C14 Mag - the compact bicycle taillight for road traffic. The Lupine C14 Mag StVZO has a 45 lumen rear light, which is STVZO compliant and also has a good and homogeneous radiation characteristics to the side - so that one is seen ideally, especially in urban traffic, as a cyclist. In addition, the C14 Mag has a brake light function and a brightness sensor. The housing is milled from aluminum. The bicycle rear light is attached via a seat post bracket made of glass-reinforced plastic, which acts as an adapter plate and in whose shell the lamp is inserted and magnetically fixed. Alternatively and optionally, there is a matching seatpost mount. The C14 Mag is charged via a magnetic charging cable from the outside.   Details: 45 lumen powerful bicycle tail light STVZO approval Aluminum housing, IP 68, IK 09 Weight 87g Dimensions: 71x40x26 mm Light duration 22 h max. charging time: 3h Scope of delivery: C14 Mag seat post mount magnetic USB charging cable

Lupine Wahoo Aero Cockpit HalterA suitable display holder for Wahoo, which can be mounted on aero handlebars and has a suitable Go-Pro mount on the underside, e.g. for the SL Grano. Other lights can be mounted using the matching Go-Pro mount. Details: suitable for Wahoo suitable for aero handlebars integrated Go-Pro mount  made of high-quality aluminium alloy, black anodized precise CNC manufacturing for highest quality weight: approx. 30 g

Lupine Rotlicht Pro International (backpack) – the smart safety light for attaching to your backpack Being seen is the main motto of the Rotlicht Pro backpack. To draw attention to yourself, the Rotlicht can be quickly and securely attached to your backpack or saddle bag – so you can be seen clearly. Note: This version is not approved by the German Road Traffic Licensing Regulations (StVZO) and therefore may not be used in road traffic in Germany or within the scope of the StVZO! The various flashing modes allow it to be adapted to the desired conditions. In our experience, the continuous light with pulse has proven itself in traffic and for attracting attention (as it startles everyone and makes them look more closely).Details: 120 lumen light (red) Aluminum housing, milled from solid aluminum Charging port: USB-C Various flashing modesBrightness sensor IPX 6 (water resistance) IK 09 (impact resistance) Weight: 55g Dimensions: 31 x 32 x 60mm Light duration: min: 2:00 h / max. 40 h Scope of delivery: Lupine Rotlicht Pro International (backpack)

Lupine Penta - the compact headlamp The Lupine Penta is an extremely compact headlamp, but delivers up to 1100 lumens of light output. In addition, it is equipped with two red lights (to maintain night vision, inconspicuous light), diffuse reading light (e.g. for reading maps or looking something up on the raised hide) and a variety of lighting modes. The housing is made of robust aluminum and is black anodized, the integrated Li-Ion battery can be charged via USB-C cable. The lamp can either be used with the included headband or can be attached directly to a helmet with an optionally available front click plate. The Penta's compact dimensions and beam pattern are designed to let you see what is happening in front of your feet and go into the distance - so it is ideal for stalking, for breaking up game, but also for jogging, hiking, mountaineering, etc. The Penta is available in two versions with a color temperature of 4500 K (neutral white) or 5700 K (daylight). The neutral white version is less demanding on the eye in the long run, while the daylight version is perceived as brighter.   Details: Weight: 86 g (lamp head alone) Waterproofness IP68 Weight with headband: 110 g Dimensions: 62x46x30 mm Light range up to 120m max. 1100 lumen light output up to 120h battery life (diffuse light) Scope of delivery: Penta Lamphead Headband Light levels - burning time: HIGH (7W) - 1 hour MEDIUM (4W) - 1:40 hours LOW (0.4W) - 16:45 hours RED (2W) - 3:20 hours DIFFUS (0.04W) - 129 hours and much more.

Lupine Handlebar Mount for Wahoo (Round Handlebars)A suitable display holder for Wahoo that can be mounted on a standard bicycle handlebar and has a matching GoPro mount on the underside for the SL Grano, for example. Other lights can be mounted using the matching GoPro mount. The mounting interface for the Garmin navigation device is located on the top. Details: suitable for Wahoo suitable for handlebars with 31,8mm diameterintegrated Go-Pro mount  made of high-quality aluminium alloy, black anodized precise CNC manufacturing for highest quality weight: approx. 35 g

Laserluchs 850 Pro 2 - High-quality brightener for night vision devices The 850 Pro 2 from Laserluchs has a reinforced focusing thread and an integrated silent toggle switch. This brightener is particularly suitable for hunting in conjunction with nightvision equipment.   Technical data: Shockproof, optimized waterproofness Wavelength: 850 nm 100% eye safe Batteries: 1x CR 123 (3V) dimensions: 14,3x3 cm Weight: 165 g

The matching dimmer for Laserluchs infrared brighteners This laser dimmer was specially developed for LASERLUCHS® IR brighteners and enables stepless control of the output brightness. Thus you achieve an optimal and high-contrast image under all lighting conditions. This avoids glare caused by reflections at close range. The LASERLUCHS® brighteners+dimmers It is compatible with all LASERLUCHS® IR brighteners and offers a variety of innovative functions such as one-hand operation, battery voltage monitoring and a microprocessor-controlled pulse shift mode, which allows you to achieve outstanding results even in fog, rain and snow. In addition, it is possible to use the brightener to send out the international SOS emergency signal in an emergency and to make yourself noticed by rescue personnel with night vision devices. comfortable and easy one-hand control Stepless brightness control operating status display microcontroller controlled pulse shift mode Compatible with all LASERLUCHS® brighteners Robust construction Made in Germany 36 months manufacturer warranty Technical data Laser dimmer type LA-DIMMER01 Battery CR123 or rechargeable battery Li-ion CR123A Dimmer mode progressive brightness, 0-100% in 35 steps Pulse shift mode 0-200Hz in 1Hz steps Microcontroller 8bit MCU RISC 8Mhz Power consumption in idle state 15µA

Lupine Piko TL Max - the compact flashlight with 1600 lumens The Lupine Piko TL Max is an extremely versatile high-performance torch with extended battery life: used as a torch for hunting, trekking, outdoor or security, Solo can be used as a compact yet powerful bicycle lamp by means of an optionally available bicycle holder (does not have STVO approval - it is MUCH too bright! ;-) ). The Piko TL Max has an integrated Li-Ion battery, can be dimmed to 5 levels, is programmable and also has a red light LED.   Details: Aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.3 Ah (24Wh) Weight: 180g Light range up to 200 m Dimensions: 103 x 42 x 24mm Charging time: 2:45 hours integrated battery capacity display   Scope of delivery: Piko TL Max Lamp Piko TL Charger   Light levels - burning time: 1600 Lumen - 1:30 hour 800 lumens - 3 hours 650 Lumen - 4 hours 360 lumens - 8 hours 40 lumens - 80 hours

Lupine USB Charger - Charging via a USB port All Lupine batteries can easily be charged via USB Charger on the laptop, computer or mobile phone power supply. The USB Charger works with almost any USB socket and in combination with a solar panel offers a very good solution to secure the power supply of your Lupine battery during long expeditions. Details: Charge current: 1 A Makes spontaneous charging on the move possible USB-A connection

Lupine Pro crossbar - for attaching the Lupine red light to a second bicycle The Lupine crossbar for the seat post holder allows the Lupine red light to be attached to a second bicycle. However, the seat post holder is required completely for the first bike. Details: Crossbar as single part

Lupine FastClick battery frame holder - for use as bicycle lighting With the frame holder you can attach a FastClick battery to the bicycle frame securely and solidly. This allows you to convert the headlamps to solid bicycle lighting (the lamp head is then attached to the handlebars with a quick release)

Lupine FrontClick holder Penta The FrontClick holder can be mounted on the Penta instead of the normal holder and allows for quick change of helmet or other FrontClick system components (headband, bike holder, etc.)

Lupine FrontClick handlebar holder 35 mm With the Lupine FrontClick handlebar holder 35 mm you can attach in no time your Lupine headlamp by means of Front Click on the bicycle handlebar. In particular, the Penta as a compact headlamp can thus be used "quickly times even" as a bicycle lamp. (Note: Not permitted in the area of the German StVO!).The handlebar holder is suitable for bicycle handlebars with a diameter of 35 mm. Details: glass fiber reinforced plastic suitable for handlebar diameter of 35 mm clamp distance: 50 mm suitable for Lupine headlamps with FrontClick system (except the Alpha) allows especially for the Penta a quick use as a bicycle lamp