Lupine Pro crossbar - for attaching the Lupine red light to a second bicycle The Lupine crossbar for the seat post holder allows the Lupine red light to be attached to a second bicycle. However, the seat post holder is required completely for the first bike. Details: Crossbar as single part

Lupine FrontClick handlebar holder 31.8 mm With the Lupine FrontClick handlebar holder 31.8 mm you can attach in no time your Lupine headlamp by means of Front Click on the bicycle handlebar. In particular, the Penta as a compact headlamp can thus be used "quickly times even" as a bicycle lamp. (Note: Not permitted in the area of the German StVO!).The handlebar holder is suitable for bicycle handlebars with a diameter of 31.8 mm. Details: glass fiber reinforced plastic suitable for handlebar diameter of 31.8 mm clamp distance: 50 mm suitable for Lupine headlamps with FrontClick system (except the Alpha) allows especially for the Penta a quick use as a bicycle lamp

Lupine SL Mono cable "Dauerbrenner" With the cable you can charge the SL Mono while driving from a powerbank or a Lupine battery with USB adapter (USB One). Scope of delivery: USB charging cable for SL Mono

Lupine bag - protection and storage for your Lupine headlamp. The Lupine bag is made of microfiber and offers the Lupine lamps, accessories or for other equipment space and protection at the same time. The bag is very minimalist, but high quality workmanship and can be pulled with two cords. The size XS (10.5 x 12 cm) is ideal for the Lupine Penta, Earpods, charger, etc.. Size S (12.5 x 17 cm) is ideal for a Piko or Blika headlamp or a Piko flashlight. Size L (15 x 25 cm) is suitable for Betty and Wilma headlamps.   Details: Microfiber

LED Infrared LED Brightener Laserluchs 5000 The Laserluchs 5000 works with an infrared light emitting diode and not with a laser module. This makes it unbeatably cheap compared to the "real" laser brighteners. The housing is solid and has a 1/4" tripod thread. The Laserluchs 5000 does not need to hide in terms of performance - after all, it has a light range of up to 600m.   Details: Wavelength: 850 nm Beam angle: 3°-15°. Power: 3W LED Power supply: 2x CR 123 Lithium battery Dimensions: 56 x 192 mm Suitable for all night vision devices Up to 600m range Silent switch High-quality internal focusing Glass lenses with anti-reflective coating Black anodized aluminum housing 1/4"-20UNC thread for e.g. photo tripod 100% Eye Safe 36 months manufacturer warranty

Laserluchs 905 Pro 2 - The brightener for high wavelength night vision devices The 905 Pro from Laserluchs is especially suitable for night vision devices and surveillance cameras operating in the 905 nm wave range. This brightener is particularly suitable for hunting applications in conjunction with dessert equipment. Even the infrared sensitive red deer is not disturbed by this form of waves.   Technical data: Shockproof, optimized waterproofness Wavelength: 905 nm 100% eye safe high range Batteries: 1x CR 123 (3V) dimensions: 14,3x3 cm Weight: 165 g

Surefire P3X Fury Intelli Beam Virtually indestructible, ultra-high-output LED spotlight, regulated for maximum output and runtime 15 to 1500 lumens of light output Precision reflector delivers a smooth, optimized beam with range and sufficient ambient light for peripheral vision Hardened window resists impact and maximizes light distribution Powerful aircraft-grade aluminum body, Mil-Spec hard anodized for extreme durability Two-stage switch - press for momentary light, turn for constant light, switch can be locked to prevent activation during transport and storage  Weather-resistant O-ring and seal closure Includes high-energy 123A batteries

Lupine Piko TL MiniMax - the compact flashlight with 1800 Lumen The Lupine Piko TL MiniMax is an extremely versatile high-performance torch: used as a torch for hunting, trekking, outdoor. The Piko TL MiniMax has an integrated Li-Ion battery, can be dimmed to 5 levels and is programmable.   Details: Aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 2.0 Ah (14Wh) Weight: 150g Light range up to 200 m Dimensions: 87 x 42 x 24mm Charging time: 1:40 hours integrated battery capacity display Scope of delivery: Piko TL MiniMax Lamp Piko TL Charger Light levels - burning time: 1800 Lumen - 1 hour 800 lumens - 1:45 hours 650 Lumen - 2:20 hours 360 lumens - 4:45 hours 40 lumens - 47 hours

Lupine Blika BT X 4 SmartCore - the headlight for hunting, fishing and outdoor activities The Lupine Blika BT X 4 SmartCore is the most powerfull headlight You probably have ever seen. With 2400 Lumen it is more powerfull then regular front lights of a car (about 1500 Lumen of light) and it is still very compact and lightweight! But the best of all is the shadow free light it gives You - illuminating your complete field of view like daylight! The Blika´s head is maschined from solid Alumium, black anodized. It offers "normal" floodlight, a narrow beam for long distance, a weak LED for reading the map, plus RED light, BLUE light & GREEN light mode for special purposes and keeping Your night visibility. The battery comes with a 100-240V charger and shows You the level of energy left. You could buy additional battery-packs in various sizes from 2,0 Ah to 20 Ah.  The headlight could be remote controlled and programmed by cellular App and offers different light strength at each source of light, so You always have the right amount of light You need. When the battery gets empty, a warning will be given and there is still enough runtime not to lost in the dark (depends on temperture and condition of the battery but under normal conditions, there is at least 1/2 hour left at low output) A broad range of accessories is beeing offered, to use this high output LED lamp on Your bicycle, headlight, helmet mounted lamp for any kind of advanture You ever been thinking off: Hunting, Fishing, Sailing, Explorations, Work, Backpacking, Climbing, Military & Defence - whatever You do, this lamp will be Your favourite choice - promised!   scope of delivery: Blika R lamp with Bluetooth remote controll unit 3,5 Ah Smartcore battery 100-240 V battery-charger "Wiesel" (depends on Your country, a travel adaptor may be necessary) headband with FrontClick & Fastclick option bluetooth remote switch bracelet for bluetooth remote (to use it on Your bicycle´s handle bar for example)Lightcase M  details: solid head maschined from Alumnium IP 68 (2m waterproof) IK 09 (shockproof) weight: 250g beam distance up to 300m charging time: 2: 45 hours remote controlled by bluetooth Made in Germany   light output & battery time: 2400 Lumen - 1:05 hours 1200 Lumen - 2:30 hours more settings are programmable - run time up to 80 hours 50/90/120 Lumen - 12 hours (red, green, blue LED)   app-store: IOS for Apple: https://itunes.apple.com/us/app/lupine-light-control/id1031179882 Android: https://play.google.com/store/apps/details?id=de.lupine.app

Lupine USB One - turns You battery pack into a USB charger With the Lupine USB One You easily turn any Lupine battery pack (external) into a chargering device for USB powered items like Your cellular phone or camera. So there is no need for any extra powerbank to carry with You on your next hunt, fishing, backpacking or cycle trip - eases Your pack weight and extends the use of Your Lupine headlight.   Hint: for charging any USB with the power of Your Lupine battery pack if You want to charge Your Lupine batteries via USB, You need the "USB Charger" instead.

Lupine SmartCore battery in different sizes The Lupine SmartCore batteries are Li-Ion batteries of the highest quality for use with the Lupine light systems and have an integrated microcontroller controlled battery capacity display. The batteries offered here have a Velcro fastener and can be attached directly to the bicycle frame. When used on a headlamp or helmet lamp, these cannot be attached directly to the back of the head, but are mainly due to their size and the higher weight intended to be worn in the jacket, vest, etc. on the body. For this you will need an extension cable (please order separately). Alternatively there are the SmartCore batteries with Fast Click system.   The Lupine batteries are available in different capacities and designs: Smart Core 3.5 Ah Voltage: 7.2 V Capacity: 25 Wh Weight: 135 g Dimensions: 79 x 41 x 30mm Smart Core 6.6 Ah Voltage: 7.2 V Capacity: 48 Wh Weight: 240 g Dimensions: 79 x 41 x 48mm Smart Core 13.2 Ah Voltage: 7.2 V Capacity: 95 Wh Weight: 430 g Dimensions: 146 x 41 x 48mm

Lupine Bike Mount for Neo/Piko/Blika - The elegant solution for attaching your lupine lamp to your bike Lupine quick-release bike mount are a way to elegantly attach the lamphead to your bike. A horizontal adjustment mechanism allows the exact adjustment of the light cone on the track. Because the tensioning device is mounted on the handlebar of your bicycle, the light always falls in the direction of travel. Details: High-quality aluminium alloy CNC milled black anodized Optional for pipe diameters of 25.4 mm, 31.8 mm and 35 mm

Lupine Piko All-In-One Kit With the Piko All-In-One Kit, you have the option of using the Piko with its stunning 2100 lumens light output either as a helmet lamp or as a headlamp. With the FrontClick attachment, the change is completed within a few seconds. The Bluetooth radio module of the lamphead opens up additional possibilities: If you add a bicycle holder to the kit, you can also use this lamp as a high performance bicycle light for off-road use (not STVO approved).   Full control thanks to Bluetooth and mobile phone app The Piko RX has a Bluetooth connection and an external switch. This means that it can be mounted on the bicycle handlebar or the pulpit parapet, for example, or the luminosity can be conveniently adjusted to current requirements with the thumb at any time, or the lighting can be switched on and off. These functions are also available via app on the mobile phone, which can also be used for switching and informs about the current state of charge, etc.. In addition, the dimming levels and special functions can be conveniently activated via the mobile phone and adapted to personal preferences.   Scope of delivery of the All-In-One Kit: Piko R lamphead with Bluetooth control 2100 Lumens Bluetooth switch holder Peppi V5 3.5 Ah SmartCore Fast Click battery Headband with FastClick and FrontClick Hlaterung Helmet holder with FRontClick Battery holder with FastClick Charger Wiesel Details: robust aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.5 Ah (25Wh) Weight: 200g Light range up to 240 m Charging time: 2:45 hours integrated battery capacity display Light levels - burning time: 2100 Lumen - 1:15 hour 950 lumens - 2:30 hours 650 Lumen - 4 hours 360 lumens - 8 hours 170 lumen - 15 hours 40 lumens - 80 hours

Lupine headband FrontClick - the standard headband With the Lupine headband you can turn your helmet lamp into a headlamp. The headband is intended as a replacement headband or additional accessory. Fits all headlamps with FrontClick System

Lupine Penta Battery The replacement battery for the Lupine Penta headlamp can be easily replaced by yourself when the battery is worn out or defective.   Details: 6.7 Wh / 1.8 Ah / 3.7 V Li-Po

Lupine Piko RX 4 SmartCore - the universal headlamp with 2100 lumens The Piko RX4 headlamp can be broken down into three characteristics: light, small & powerful. Now in its third generation, it delivers an impressive 2100 lumens of light and can illuminate the night as bright as day. It is not bigger (the lamp head) than a matchbox and weighs only 200g as a complete headlight-system when ready for use with a 3.5 Ah Li-Ion battery. Another new feature is that the Piko has an additional diffuse "reading and camping light". This can be used particularly well for map reading, in the close range etc.. The size of the lamp head has shrunk compared to the previous version, the light output has been increased and the heat management has been improved. The app for control via Bluetooth and the radio module are new and allow a very individual configuration of the lamp.   Unique lighting system for every outdoor adventure Nevertheless, the Piko RX 4 Smartcore is still an individual lighting system for a variety of outdoor applications: As basic equipment it comes as a headlamp. With an optional holder, it can be used effortlessly as a bicycle lamp, helmet lamp or also as treestand lighting (where hunting is permitted due to the threat of African swine fever by means of light). With the optional "USB-One" adapter, the Piko battery can also be used as a power bank, e.g. to charge the mobile phone.   Full control thanks to Bluetooth and mobile app The Piko RX has a Bluetooth connection and an additional external switch. This means that it can be mounted on the bicycle handlebar or the treestand parapet, for example, or the luminosity can be conveniently adjusted to current requirements with the thumb at any time, or the lighting can be switched on and off. These functions are also available via app on the mobile phone, which can also be used for switching and informs about the current state of charge, etc.. In addition, the dimming levels and special functions can be conveniently activated via the mobile phone and adapted to personal preferences. The Piko has a front-click holder, with which the lamp head can be changed in no time at all from e.g. a helmet to the headband or another holder. The SmartCore battery has a capacity indicator so that you are not suddenly in the dark. (In addition, both the Bluetooth switch and the lamp switch display this information). The battery of the Lupine Piko RX 4 SmartCore can be changed with the Fast-Click system in just a few simple steps. Thus, the purchase of a second battery as a replacement and for a quick change can be worthwhile depending on the application.   Comprehensive accessories for every imaginable purpose A wide range of accessories completes almost every wish and allows the lamp to be adapted for almost every imaginable application. Optional are also other battery variants, the lamp head alone or a version as a helmet lamp available. As accessories there are colour filters, various holders, spare batteries, and much more.   Details: robust aluminium housing, milled from solid material up to 2100 lumens light output if required: Bluetooth control via external switch or mobile phone app IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.5 Ah (25Wh) Lamphead size: 32 x 43 x 26mm Weight: 200g Light range up to 210 m Charging time: 2:45 hours integrated battery capacity display (Smartcore) Scope of delivery: Piko RX lamphead 2100 lumen with Bluetooth control and front click mount Headband Piko R FastClick FastClick battery SmartCore 3.5 Ah Bluetooth remote control Bracelet for Bluetooth radio remote control Charger Wiesel Light levels - burning time: 2100 Lumen - 1:15 hour 950 lumens - 2:30 hours 650 Lumen - 4 hours 350 lumen - 8 hours 170 lumen - 15 hours 40 lumens - 80 hours

Lupine SmartCore FastClick Batteries The Lupine SmartCore FastClick batteries are Li-Ion batteries of the highest quality for use with the Lupine light systems and have an integrated microcontroller controlled battery capacity display. The Fast Click version can be mounted on the back of the headlamps without additional mounting material or on the bicycle frame using the optional FastClick frame holder. The advantage is the quick replacement of the batteries and the easy mounting of the headlamps.   Alternatively, there are SmartCore batteries without the Fast Click system - even with a larger battery capacity.   The Lupine batteries are available in different capacities and designs: SmartCore FastClick 2.0 Ah Voltage: 7.2 V Capacity: 14 Wh Weight: 88 g Dimensions: 59 x 40 x 22mm SmartCore FastClick 3.5 Ah Voltage: 7.2 V Capacity: 25 Wh Weight: 120 g Dimensions: 72 x 40 x 22mm

Lupine Penta Pro 4 Smartcore Headlamp The Penta Pro is a compact headlamp with 1400 lumen light output and a host of useful features. It has white light & red light in several light levels, as well as a flash mode and SOS mode. Integrated light and tilt sensors enable the lamp to recognize when the user is looking at a map, for example, and automatically reduces the light output to avoid blinding the user. By using an external rechargeable battery, the running time can be extended as required with several rechargeable batteries. The lamp head is attached to the headband using Lupine's Front-Click system and therefore also offers the option of attaching it to a Front-Click bike handlebar holder in no time at all. The Penta Pro headlamp is a well-balanced headlamp for a wide range of tasks. However, it does not offer the ultimate light output and programming options of the Piko or Blika models.   Details: 1400 lumen light output approx. 140m range 1h 30 min light duration at maximum light output (with 3.1Ah battery) Robust aluminum housing Waterproof up to 2m Weight of the lamp head: approx. 60 g Dimensions: 47 x36 x 27 mm

Lupine Handlebar Mount for Garmin (Round Handlebar)A suitable display holder for Garmin that can be mounted on a standard bicycle handlebar and has a matching GoPro mount on the underside for the SL Grano, for example. Other lights can be mounted using the matching GoPro mount. The mounting interface for the Garmin navigation device is located on the top. Details: suitable for Garmin suitable for handlebars with 31,8mm diameterintegrated Go-Pro mount  made of high-quality aluminium alloy, black anodized precise CNC manufacturing for highest quality weight: approx. 35 g

The right dimmer for the Laserluchs LED-IR brighteners This dimmer was developed especially for the LASERLUCHS® IR-5000 and allows a stepless control of the output brightness. Thus you achieve an optimal and high-contrast image under all lighting conditions. This avoids glare caused by reflections at close range. The LASERLUCHS® brightener+dimmer combination makes your night vision device even more versatile. It is compatible with all LASERLUCHS® IR brighteners and offers a variety of innovative functions such as one-hand operation, battery voltage monitoring and a microprocessor-controlled pulse shift mode, which allows you to achieve outstanding results even in fog, rain and snow. In addition, it is possible to use the brightener to send out the international SOS emergency signal in an emergency and to make yourself noticed by rescue personnel with night vision devices. comfortable and easy one-hand control Stepless brightness control operating status display microcontroller controlled pulse shift mode Compatible with all LASERLUCHS® brighteners Robust construction Made in Germany 36 months manufacturer warranty Technical data LED dimmer Battery CR123 or rechargeable battery Li-ion CR123A Dimmer mode progressive brightness, 0-100% in 35 steps Pulse shift mode 0-200Hz in 1Hz steps Microcontroller 8bit MCU RISC 8Mhz Power consumption in idle state 15µA

Lupine battery tanks 3.3/6.6/9.9 Ah - The power supply for your Lupine Betty TL2 /TL The batteries for Lupine flashlights are absolutely waterproof and impact-resistant when mounted. A very high-quality and robust aluminium housing protects the TL batteries from dust, shocks and water. The technical data of the TL batteries: Versions: 3.3 Ah / 6.6 Ah / 9.9 Ah Material: CNC milled, Aluminium 6061-T6, Shot-peen, hard anodized Weight: 152 g / 273 g / 430 g Watt Hours (Wh): 24 / 48 / 71

Lupine Bike Mount for Wilma - The elegant solution for attaching your headlamp to a bicycle Lupine quick-releases are a way to elegantly attach the lamphead to your bike. A horizontal adjustment mechanism allows the exact adjustment of the light cone on the track. Because the tensioning device is mounted on the handlebar of your bicycle, the light always falls in the direction of travel. Details: High-quality aluminium alloy CNC milled black anodized Optional for pipe diameters of 25.4 mm, 31.8 mm and 35 mm

Lupine quick release for Betty - The elegant solution for attaching your headlamp to a bike Lupine quick-releases are a way to elegantly attach the lamphead to your bike. A horizontal adjustment mechanism allows the exact adjustment of the light cone on the track. Because the tensioning device is mounted on the handlebar of your bicycle, the light always falls in the direction of travel. Details: High-quality aluminium alloy CNC milled black anodized Optional for pipe diameters of 25.4 mm, 31.8 mm and 35 mm

Lupine Charger One - The charger for all Lupine batteries The Charger One represents the latest generation of charging technology. All charging functions are perfectly designed for Lupine batteries. Specially developed software ensures reliable charging to the brim. Another function is the illuminated display. Information such as the voltage or the ampere charged can be read from this display. Various functions of the Lupine Charger One Li-Ion charging program (standard program) - battery is charged normally Li-Ion discharge program - battery is completely discharged discharge and charging program - battery is completely discharged and recharged 50% Storage Program - Battery is charged to 50% capacity for better storage life   Details: Charge current: 2.5 A LCD display 12 V cable 12 V adapter for cigarette lighter