Innomount quick detachable scope mount for HIKMicro Thunder TH 35 This Innoumount quick detachable mount is a specialy designed for HIKMicro Thunder TH 35 Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for HIKMicro Thunder TH 35 Height: 18 mm Type number: 50-HMT-18-00-800
Innomount Zero for Blaser - Pulsar Talion The Innomount Zero quick release mount for Blaser hunting rifles is a solid connection between Your rifle and the Pulsar Talion thermal image scope. With the new Zero locking mechanism, you screw the mount onto the rifle and then press the lever to mount - this decouples it and prevents it from operating the bolt mechanism. To release the mount again, pull the lever towards you, this couples it in the breech mechanism and now the breech can be released again. A very reliable and safe method. Details: "Zero" locking mechanism highly accurate suitable for Blaser suitable for Pulsar Talion height: 16 mm type number: 40-TN-16-00-800
Innomount Zero - Blaser - Tube/Thermal (30mm) The Innomount Zero quick release mount for Blaser hunting rifles is a solid connection between your Blaser hunting rifle and the Pulsar Talion thermal imaging device. With the new Zero breech system, you screw the mount onto the weapon and then press the lever for mounting - this decouples it and prevents it from actuating the breech mechanism. To release the mount again, pull the lever towards you and it will be coupled in the bolt mechanism and now the bolt can be released again. A very reliable and safe method. Fits the following optics: Pulsar Thermion I+II/Pro/LRF / Duo DXP50/DXP55 | Infiray Tube TL35/TH35/TH50 Hikmicro Stellar SH35/50 | SQ35/50 | Alpex A50T | A50TN | Lahoux Sight 35 Night Pearl Marten TU 420/430/450/650 Guide TU 420/430/450/620/630/650 Thermtec Ares 335/360/635/660 Conotech Night Arrow Details: Zero-lock system repeatable suitable for Blaser suitable for a variety of thermal imaging devices overall height: 20 mm Type number: 40-TH-20-00-800
Innomount quick detachable scope mount for Blaser - Guide TS450 This Innoumount quick detachable mount is a specialy designed for Guide TS450 themal image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Guide TS450 Height: 17 mm Type number: 50-GT-17-00-800
Innomount quick detachable scope mount for Pulsar Apex / Digisight / Trail Thermal Sight This Innoumount quick detachable mount is a specialy designed for Pulsar APEX / Digisight / Trail Thermal sight night vision devices. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: quick detachbale design repeatable accuracy made of steel suitable for Blaser rifles suitable for Pulsar APEX / Digisight / Trail Thermal sight Overall height: 10 mm Type number: 50-PA-10-00-800
Innomount quick detachable scope mount for Pulsar Yukon Photon This Innoumount quick detachable mount is a specialy designed for Yukon Photon night vision devices. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: quick detachbale design repeatable accuracy made of steel suitable for Blaser rifles suitable for Yukon Photon Overall height: 27 mm Type number: 50-YP-27-00-800
Innomount quick detachable scope mount for tube/Thermal (30mm) This Innoumount quick detachable mount is a specialy designed for Pulsar Thermion and other Thermal Imager devices. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened.Suitable for:Pulsar Thermion I+II/Pro/LRF / Duo DXP50/DXP55Infiray Tube TL35/TH35/TH35SE/50/TS60 Hikmicro Stellar SH35/50 | SQ35/50Lahoux Sight 35Night Pearl Marten TU 420/430/450/650Guide TU 420/430/450/620/630/650Thermtec Ares 335/360/635/660Conotech Night Arrow Details: Clamping lever with protection against unintentional opening repeatable suitable for Blaser rifles suitable for Pulsar Thermion Height: total 20 mm / lower ring part 9 mm / ring diameter 30 mm Type number: 50-TH-20-00-800
Innomount quick detachable scope mount for Blaser - Pard NV008 This Innoumount quick detachable mount is a specialy designed for Pard NV008 and SA-Series Night Vision scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Pard NV008 / SA-Series Height: 13 mm Type number: 50-PD-13-00-800
Innomount quick detachable scope mount for GSCI Wolfhound This Innoumount quick detachable mount is a specialy designed for GSCI Wolfhound Night Vision scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for GSCI Wolfhound Height: 16 mm Type number: 50-GSWH-16-00-800
Innomount quick detachable scope mount for Dedal Hunter This Innoumount quick detachable mount is a specialy designed for Dedal Hunter Night Vision scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Dedal Hunter Height: 14 mm Type number: 50-DH-14-00-800
Innomount quick detachable scope mount for I Ray Mini This Innoumount quick detachable mount is a specialy designed for I Ray Mini (Liemke Merlin 19E/25E) Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for I Ray Mini (Liemke Merlin 19E/25E) Height: 16 mm Type number: 50-IRM-16-00-800
Innomount quick detachable scope mount for I Ray X-Sight This Innoumount quick detachable mount is a specialy designed for I Ray Xsight (Liemke Sperber 50 & 64 / Lahoux Scope) Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for I Ray Xsight (Liemke Sperber 50 & 64 / Lahoux Scope) Height: 16 mm Type number: 50-IRX-16-00-800
Innomount quick detachable scope mount for Blaser - ATN This Innoumount quick detachable mount is a specialy designed for Night Vision scopes from ATN. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for X-Sight I+II / Thor / Mars Height: 12 mm Type number: 50-ATN-12-00-800
Innomount quick detachable scope mount for Blaser - Fortuna General One This Innoumount quick detachable mount is a specialy designed for a Fortuna General One Night Vision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Fortuna General One Height: 14 mm Type number: 50-FG1-14-00-800
Innomount quick detachable scope mount for Blaser - Fortuna General This Innoumount quick detachable mount is a specialy designed for a Fortuna General Night Vision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Fortuna General Height: 18 mm Type number: 50-FG-18-00-800
Innomount quick detachable scope mount for Blaser - TVT Archer This Innoumount quick detachable mount is a specialy designed for a TVT Archer Night Vision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for TVT Archer Height: 13 mm Type number: 50-AR-13-00-800
Innomount quick detachable scope mount for Pulsar Digex This Innoumount quick detachable mount is a specialy designed for Pulsar Diugex NV scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Pulsar Digex Height: 27 mm Type number: 50-DE-23-00-800
Innomount quick detachable scope mount for Blaser - ATN 4 This Innoumount quick detachable mount is a specialy designed for the Night Vision scope ATN 4 (and fits also X-Sight 4K PRO / X-Sight 4K Buckhunter / Thor 4. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for ATN 4 / X-Sight 4K PRO / X-Sight 4K Buckhunter / Thor 4 Height: 24 mm Type number: 50-ATN4-24-00-800
Innomount quick detachable scope mount for Pulsar Trail 2 / Digisight Ultra N450 & N455 This Innoumount quick detachable mount is a specialy designed for Pulsar Trail 2 / Digisight Ultra N450 & N455 night vision devices. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: quick detachbale design repeatable accuracy made of steel suitable for Blaser rifles suitable for Pulsar Trail 2 / Digisight Ultra N450 & N455 Overall height: 10 mm Type number: 50-PA2-10-00-800
Innomount quick detachable scope mount for I Ray Rico This Innoumount quick detachable mount is a specialy designed for I Ray Rico Thermal Image scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for I Ray Rico Height: 10 mm Type number: 50-IRR-10-00-800
Innomount quick detachable scope mount for Pulsar Talion This Innoumount quick detachable mount is a specialy designed for Pulsar Talion thermal image scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable suitable for Blaser rifles suitable for Pulsar Talion Height: 16 mm Type number: 50-TN-16-00-800
With the LED illuminated front sight for Your hunting rifle, we have pushed the performance of using open sights untill night! - so it is a perfect tool for hunting on driven hunts, follow ups and anything, but the worst light and weather conditions With our latest LED-Sight "Firefly" we have illuminated the whole bead of the front sight - this results in an easier-to-use then our first editions of the LED-Sights "Classic" or "Day&Nightfire" (with those there is just a small dot of the bead illuminated!) and a much higher light output - so day light visibility has increased very much! It interacts also with a broader range of rear sights then the old editions. In daylight, the LED-Sight "Firefly" could be used like a normal fibre sight as it´s plastic material is light gathering and self-illumnating under the sun. But as soon as You switch the LED on, You have an active illuminated front sight, allowing You to aim & shoot under the worst light conditions easily (untill darkness!) - which You can´t perform with any other open sights! The battery (Battery BR 435) runs up to 15 hours. The housing is waterproof sealed. The sight is height adjustable. 1:1 exchange with most rifles - and in worst case just a potrusion bolt is required - which is not a big task for any serious gunsmith! 1:1 exchange is possible with this type of guns (if not a special edition): Blaser R93 Blaser R8 Blaser K95 Heym SR 30 Heym SR 21 Mauser M03 Mauser M12 Sauer 202 Sauer 303 Sauer 404 u.v.m. and with an adaptor also with this type of guns Benelli Browning Rößler Remington Sako Tikka Technical Details: Length: 78 mm Height of Base: 14 mm max. height of the bead over the base: 6 mm Weight with battery: ca. 12 g Hint: With the editions "Firefly" and "Chamäleon" You don´t need to place the bolt ( #10 in the manual) between the spring while assembling the LED-Sight on your rifle. Gebrauchsanleitung-deutsch-1-0 (please download here) Manual-for-LED-Sight (English) Mode-d-Employ (French) Comparing the different modells (left to right: Day&Nightfire, Chamäleaon, Firefly) Comparing Chamäleon (left) and Firefly (right) in daylight and at night conditions
Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder. Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).
LED powered front sight 1st Generation Day&Nightfire for hunting rifles The LED-Sight 1st generation Day&Nightfire differs in the luminosity to the current models and other variants of the illuimnated LED sights. Nevertheless, it enables fast, reliable target acquisition with open sights - even in poor lighting conditions. Since the 1st generation Day&Nightfire gives way to newer models, you can buy the remaining stock from us at reasonable prices. All highlights at a glance: Battery lasts approx. 10 to 12 hours Redundancy: can be used like a normal front sight in case of battery failure Height-adjustable luminous sight can be used during the day in a passive state as a conventional luminous sight compatible with many hunting rifles, including Blaser R93, Heym SR 30, Mauser M03 and Sauer 202 Can be used on other weapons using a potrusion bolts installated on the barrel Advantages for driven hunts and searches The Day&Nightfire already glows passively in daylight like a conventional fibre sight. The LED is switched on at dawn, dusk or simply in poor lighting conditions (e.g. tree shade, cloudy visibility, rain) and optimum target detection can be achieved independently of daylight. Last but not least, target acquisition with LED beacons is much faster and more intuitive when the sights are open, because the rear sight and front sights can be positioned more easily. With a hunting rifle with riflescope, the LED-Sight can easily be carried on the rifle - unlike a red dot sight. The price of the red dot sight also differs, especially now that the 1st generation Day&Nightfire is being sold at particularly low prices. In addition, no reflections, raindrops or scattered light interfere with the target detection, as is the case with some reflex sights. Low-priced remaining stocks: We stock the 1st generation Day&Nightfire LED-Sight "while stocks last". So it's worth it. If you need assistance in selecting the right LED -Sight, please call us at +49-6071-922765. We will advise you individually! Instructions for use available for download in advance: Gebrauchsanleitung-deutsch-1-0 (bitte klicken) Manual-for-LED-Sight (English) Mode-d-Employ (French)