Lupine FrontClick handlebar holder 31.8 mm With the Lupine FrontClick handlebar holder 31.8 mm you can attach in no time your Lupine headlamp by means of Front Click on the bicycle handlebar. In particular, the Penta as a compact headlamp can thus be used "quickly times even" as a bicycle lamp. (Note: Not permitted in the area of the German StVO!).The handlebar holder is suitable for bicycle handlebars with a diameter of 31.8 mm. Details: glass fiber reinforced plastic suitable for handlebar diameter of 31.8 mm clamp distance: 50 mm suitable for Lupine headlamps with FrontClick system (except the Alpha) allows especially for the Penta a quick use as a bicycle lamp

Lupine SL Mono cable "Dauerbrenner" With the cable you can charge the SL Mono while driving from a powerbank or a Lupine battery with USB adapter (USB One). Scope of delivery: USB charging cable for SL Mono

Lupine SmartCore FastClick Batteries The Lupine SmartCore FastClick batteries are Li-Ion batteries of the highest quality for use with the Lupine light systems and have an integrated microcontroller controlled battery capacity display. The Fast Click version can be mounted on the back of the headlamps without additional mounting material or on the bicycle frame using the optional FastClick frame holder. The advantage is the quick replacement of the batteries and the easy mounting of the headlamps.   Alternatively, there are SmartCore batteries without the Fast Click system - even with a larger battery capacity.   The Lupine batteries are available in different capacities and designs: SmartCore FastClick 2.0 Ah Voltage: 7.2 V Capacity: 14 Wh Weight: 88 g Dimensions: 59 x 40 x 22mm SmartCore FastClick 3.5 Ah Voltage: 7.2 V Capacity: 25 Wh Weight: 120 g Dimensions: 72 x 40 x 22mm

Lupine SL Grano F (International) - a lamp for outdoor and racing use wit remote controlThe Lupine SL Grano International has a daytime running light of 150 lumens and two-stage low beam of 350 and 900 lumens light output plus a extra bright mode with up to 1100 Lumen. An ambient light sensor activates the dimmed low beam in automatic mode in the dark. In contrast to the StVZO version, the international version has three additional light modes: daytime, static and nighttime flash. The SL Grano is mounted directly below a bike computer (e.g. Garmin) using an existing Go-Pro mount.  Note: We would like to point out that the SL Grano INTERNATIONAL is not STVO approved and therefore may not be used in road traffic in the Federal Republic of Germany! The SL Grano (International) may therefore only be used outside the scope of the German STVZO! (i.e. abroad - however, please also inquire about the respective regulations there) Details: Housing milled from aluminum no StVZO approval 150 lumens daytime running light 350 & 900 lumens low beam longe range beam with up to 1100 Lumenremote control via BluetoothUSB-C connection (charger required) 17 Wh battery Charging time: approx. 2h 30 min Running time: max. 1h 45 min with low beam Running time: max. 12h daytime running light impact and water resistant according to IK09 and IPX6Included in the package: SL Grano F (Int) lamp Bluetooth remote control with XL mount Lightcase S Screw

LED Infrared LED Brightener Laserluchs 5000 The Laserluchs 5000 works with an infrared light emitting diode and not with a laser module. This makes it unbeatably cheap compared to the "real" laser brighteners. The housing is solid and has a 1/4" tripod thread. The Laserluchs 5000 does not need to hide in terms of performance - after all, it has a light range of up to 600m.   Details: Wavelength: 850 nm Beam angle: 3°-15°. Power: 3W LED Power supply: 2x CR 123 Lithium battery Dimensions: 56 x 192 mm Suitable for all night vision devices Up to 600m range Silent switch High-quality internal focusing Glass lenses with anti-reflective coating Black anodized aluminum housing 1/4"-20UNC thread for e.g. photo tripod 100% Eye Safe 36 months manufacturer warranty

Laserluchs 905 Pro 2 - The brightener for high wavelength night vision devices The 905 Pro from Laserluchs is especially suitable for night vision devices and surveillance cameras operating in the 905 nm wave range. This brightener is particularly suitable for hunting applications in conjunction with dessert equipment. Even the infrared sensitive red deer is not disturbed by this form of waves.   Technical data: Shockproof, optimized waterproofness Wavelength: 905 nm 100% eye safe high range Batteries: 1x CR 123 (3V) dimensions: 14,3x3 cm Weight: 165 g

Surefire P3X Fury Intelli Beam Virtually indestructible, ultra-high-output LED spotlight, regulated for maximum output and runtime 15 to 1500 lumens of light output Precision reflector delivers a smooth, optimized beam with range and sufficient ambient light for peripheral vision Hardened window resists impact and maximizes light distribution Powerful aircraft-grade aluminum body, Mil-Spec hard anodized for extreme durability Two-stage switch - press for momentary light, turn for constant light, switch can be locked to prevent activation during transport and storage  Weather-resistant O-ring and seal closure Includes high-energy 123A batteries

Lupine Piko TL MiniMax - the compact flashlight with 1800 Lumen The Lupine Piko TL MiniMax is an extremely versatile high-performance torch: used as a torch for hunting, trekking, outdoor. The Piko TL MiniMax has an integrated Li-Ion battery, can be dimmed to 5 levels and is programmable.   Details: Aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 2.0 Ah (14Wh) Weight: 150g Light range up to 200 m Dimensions: 87 x 42 x 24mm Charging time: 1:40 hours integrated battery capacity display Scope of delivery: Piko TL MiniMax Lamp Piko TL Charger Light levels - burning time: 1800 Lumen - 1 hour 800 lumens - 1:45 hours 650 Lumen - 2:20 hours 360 lumens - 4:45 hours 40 lumens - 47 hours

Lupine Blika BT X 4 SmartCore - the headlight for hunting, fishing and outdoor activities The Lupine Blika BT X 4 SmartCore is the most powerfull headlight You probably have ever seen. With 2400 Lumen it is more powerfull then regular front lights of a car (about 1500 Lumen of light) and it is still very compact and lightweight! But the best of all is the shadow free light it gives You - illuminating your complete field of view like daylight! The Blika´s head is maschined from solid Alumium, black anodized. It offers "normal" floodlight, a narrow beam for long distance, a weak LED for reading the map, plus RED light, BLUE light & GREEN light mode for special purposes and keeping Your night visibility. The battery comes with a 100-240V charger and shows You the level of energy left. You could buy additional battery-packs in various sizes from 2,0 Ah to 20 Ah.  The headlight could be remote controlled and programmed by cellular App and offers different light strength at each source of light, so You always have the right amount of light You need. When the battery gets empty, a warning will be given and there is still enough runtime not to lost in the dark (depends on temperture and condition of the battery but under normal conditions, there is at least 1/2 hour left at low output) A broad range of accessories is beeing offered, to use this high output LED lamp on Your bicycle, headlight, helmet mounted lamp for any kind of advanture You ever been thinking off: Hunting, Fishing, Sailing, Explorations, Work, Backpacking, Climbing, Military & Defence - whatever You do, this lamp will be Your favourite choice - promised!   scope of delivery: Blika R lamp with Bluetooth remote controll unit 3,5 Ah Smartcore battery 100-240 V battery-charger "Wiesel" (depends on Your country, a travel adaptor may be necessary) headband with FrontClick & Fastclick option bluetooth remote switch bracelet for bluetooth remote (to use it on Your bicycle´s handle bar for example)Lightcase M  details: solid head maschined from Alumnium IP 68 (2m waterproof) IK 09 (shockproof) weight: 250g beam distance up to 300m charging time: 2: 45 hours remote controlled by bluetooth Made in Germany   light output & battery time: 2400 Lumen - 1:05 hours 1200 Lumen - 2:30 hours more settings are programmable - run time up to 80 hours 50/90/120 Lumen - 12 hours (red, green, blue LED)   app-store: IOS for Apple: https://itunes.apple.com/us/app/lupine-light-control/id1031179882 Android: https://play.google.com/store/apps/details?id=de.lupine.app

Lupine USB One - turns You battery pack into a USB charger With the Lupine USB One You easily turn any Lupine battery pack (external) into a chargering device for USB powered items like Your cellular phone or camera. So there is no need for any extra powerbank to carry with You on your next hunt, fishing, backpacking or cycle trip - eases Your pack weight and extends the use of Your Lupine headlight.   Hint: for charging any USB with the power of Your Lupine battery pack if You want to charge Your Lupine batteries via USB, You need the "USB Charger" instead.

Lupine SmartCore battery in different sizes The Lupine SmartCore batteries are Li-Ion batteries of the highest quality for use with the Lupine light systems and have an integrated microcontroller controlled battery capacity display. The batteries offered here have a Velcro fastener and can be attached directly to the bicycle frame. When used on a headlamp or helmet lamp, these cannot be attached directly to the back of the head, but are mainly due to their size and the higher weight intended to be worn in the jacket, vest, etc. on the body. For this you will need an extension cable (please order separately). Alternatively there are the SmartCore batteries with Fast Click system.   The Lupine batteries are available in different capacities and designs: Smart Core 3.5 Ah Voltage: 7.2 V Capacity: 25 Wh Weight: 135 g Dimensions: 79 x 41 x 30mm Smart Core 6.6 Ah Voltage: 7.2 V Capacity: 48 Wh Weight: 240 g Dimensions: 79 x 41 x 48mm Smart Core 13.2 Ah Voltage: 7.2 V Capacity: 95 Wh Weight: 430 g Dimensions: 146 x 41 x 48mm

Lupine battery tanks 3.3/6.6/9.9 Ah - The power supply for your Lupine Betty TL2 /TL The batteries for Lupine flashlights are absolutely waterproof and impact-resistant when mounted. A very high-quality and robust aluminium housing protects the TL batteries from dust, shocks and water. The technical data of the TL batteries: Versions: 3.3 Ah / 6.6 Ah / 9.9 Ah Material: CNC milled, Aluminium 6061-T6, Shot-peen, hard anodized Weight: 152 g / 273 g / 430 g Watt Hours (Wh): 24 / 48 / 71

Lupine Bike Mount for Neo/Piko/Blika - The elegant solution for attaching your lupine lamp to your bike Lupine quick-release bike mount are a way to elegantly attach the lamphead to your bike. A horizontal adjustment mechanism allows the exact adjustment of the light cone on the track. Because the tensioning device is mounted on the handlebar of your bicycle, the light always falls in the direction of travel. Details: High-quality aluminium alloy CNC milled black anodized Optional for pipe diameters of 25.4 mm, 31.8 mm and 35 mm

Lupine Piko All-In-One Kit With the Piko All-In-One Kit, you have the option of using the Piko with its stunning 2100 lumens light output either as a helmet lamp or as a headlamp. With the FrontClick attachment, the change is completed within a few seconds. The Bluetooth radio module of the lamphead opens up additional possibilities: If you add a bicycle holder to the kit, you can also use this lamp as a high performance bicycle light for off-road use (not STVO approved).   Full control thanks to Bluetooth and mobile phone app The Piko RX has a Bluetooth connection and an external switch. This means that it can be mounted on the bicycle handlebar or the pulpit parapet, for example, or the luminosity can be conveniently adjusted to current requirements with the thumb at any time, or the lighting can be switched on and off. These functions are also available via app on the mobile phone, which can also be used for switching and informs about the current state of charge, etc.. In addition, the dimming levels and special functions can be conveniently activated via the mobile phone and adapted to personal preferences.   Scope of delivery of the All-In-One Kit: Piko R lamphead with Bluetooth control 2100 Lumens Bluetooth switch holder Peppi V5 3.5 Ah SmartCore Fast Click battery Headband with FastClick and FrontClick Hlaterung Helmet holder with FRontClick Battery holder with FastClick Charger Wiesel Details: robust aluminium housing, milled from solid material IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.5 Ah (25Wh) Weight: 200g Light range up to 240 m Charging time: 2:45 hours integrated battery capacity display Light levels - burning time: 2100 Lumen - 1:15 hour 950 lumens - 2:30 hours 650 Lumen - 4 hours 360 lumens - 8 hours 170 lumen - 15 hours 40 lumens - 80 hours

Lupine headband FrontClick - the standard headband With the Lupine headband you can turn your helmet lamp into a headlamp. The headband is intended as a replacement headband or additional accessory. Fits all headlamps with FrontClick System

Lupine Penta Battery The replacement battery for the Lupine Penta headlamp can be easily replaced by yourself when the battery is worn out or defective.   Details: 6.7 Wh / 1.8 Ah / 3.7 V Li-Po

Lupine Piko RX 4 SmartCore - the universal headlamp with 2100 lumens The Piko RX4 headlamp can be broken down into three characteristics: light, small & powerful. Now in its third generation, it delivers an impressive 2100 lumens of light and can illuminate the night as bright as day. It is not bigger (the lamp head) than a matchbox and weighs only 200g as a complete headlight-system when ready for use with a 3.5 Ah Li-Ion battery. Another new feature is that the Piko has an additional diffuse "reading and camping light". This can be used particularly well for map reading, in the close range etc.. The size of the lamp head has shrunk compared to the previous version, the light output has been increased and the heat management has been improved. The app for control via Bluetooth and the radio module are new and allow a very individual configuration of the lamp.   Unique lighting system for every outdoor adventure Nevertheless, the Piko RX 4 Smartcore is still an individual lighting system for a variety of outdoor applications: As basic equipment it comes as a headlamp. With an optional holder, it can be used effortlessly as a bicycle lamp, helmet lamp or also as treestand lighting (where hunting is permitted due to the threat of African swine fever by means of light). With the optional "USB-One" adapter, the Piko battery can also be used as a power bank, e.g. to charge the mobile phone.   Full control thanks to Bluetooth and mobile app The Piko RX has a Bluetooth connection and an additional external switch. This means that it can be mounted on the bicycle handlebar or the treestand parapet, for example, or the luminosity can be conveniently adjusted to current requirements with the thumb at any time, or the lighting can be switched on and off. These functions are also available via app on the mobile phone, which can also be used for switching and informs about the current state of charge, etc.. In addition, the dimming levels and special functions can be conveniently activated via the mobile phone and adapted to personal preferences. The Piko has a front-click holder, with which the lamp head can be changed in no time at all from e.g. a helmet to the headband or another holder. The SmartCore battery has a capacity indicator so that you are not suddenly in the dark. (In addition, both the Bluetooth switch and the lamp switch display this information). The battery of the Lupine Piko RX 4 SmartCore can be changed with the Fast-Click system in just a few simple steps. Thus, the purchase of a second battery as a replacement and for a quick change can be worthwhile depending on the application.   Comprehensive accessories for every imaginable purpose A wide range of accessories completes almost every wish and allows the lamp to be adapted for almost every imaginable application. Optional are also other battery variants, the lamp head alone or a version as a helmet lamp available. As accessories there are colour filters, various holders, spare batteries, and much more.   Details: robust aluminium housing, milled from solid material up to 2100 lumens light output if required: Bluetooth control via external switch or mobile phone app IP 68 (2m waterproof) IK 09 (impact strength) Battery: 3.5 Ah (25Wh) Lamphead size: 32 x 43 x 26mm Weight: 200g Light range up to 210 m Charging time: 2:45 hours integrated battery capacity display (Smartcore) Scope of delivery: Piko RX lamphead 2100 lumen with Bluetooth control and front click mount Headband Piko R FastClick FastClick battery SmartCore 3.5 Ah Bluetooth remote control Bracelet for Bluetooth radio remote control Charger Wiesel Light levels - burning time: 2100 Lumen - 1:15 hour 950 lumens - 2:30 hours 650 Lumen - 4 hours 350 lumen - 8 hours 170 lumen - 15 hours 40 lumens - 80 hours

Lupine Penta Pro 4 Smartcore Headlamp The Penta Pro is a compact headlamp with 1400 lumen light output and a host of useful features. It has white light & red light in several light levels, as well as a flash mode and SOS mode. Integrated light and tilt sensors enable the lamp to recognize when the user is looking at a map, for example, and automatically reduces the light output to avoid blinding the user. By using an external rechargeable battery, the running time can be extended as required with several rechargeable batteries. The lamp head is attached to the headband using Lupine's Front-Click system and therefore also offers the option of attaching it to a Front-Click bike handlebar holder in no time at all. The Penta Pro headlamp is a well-balanced headlamp for a wide range of tasks. However, it does not offer the ultimate light output and programming options of the Piko or Blika models.   Details: 1400 lumen light output approx. 140m range 1h 30 min light duration at maximum light output (with 3.1Ah battery) Robust aluminum housing Waterproof up to 2m Weight of the lamp head: approx. 60 g Dimensions: 47 x36 x 27 mm

Lupine Handlebar Mount for Garmin (Round Handlebar)A suitable display holder for Garmin that can be mounted on a standard bicycle handlebar and has a matching GoPro mount on the underside for the SL Grano, for example. Other lights can be mounted using the matching GoPro mount. The mounting interface for the Garmin navigation device is located on the top. Details: suitable for Garmin suitable for handlebars with 31,8mm diameterintegrated Go-Pro mount  made of high-quality aluminium alloy, black anodized precise CNC manufacturing for highest quality weight: approx. 35 g

Lupine Rotlicht Pro BT (International) – the smart safety light for outdoor and racing use with Bluetooth controlThe Lupine Rotlicht BT (international version) is a smart safety light with a brake light function. With the BT remote control (optional) You could easily control and switch the rear light while riding Your bike. It can be individually programmed. Thanks to its light sensor, it can also be used as a brake light during the day and switches on automatically when it gets dark. Various light and flashing modes are available. The Rotlicht Pro has a holder for the seat post with a rubber band. With an optional seat post holder, the red light can also be used as a compact and very effective rear light on a bicycle (it is not approved for use on public roads!). The various flashing modes allow it to be adapted to the desired conditions. Note: We would like to point out that the “Rotlicht Pro BT” is not approved for use on public roads in Germany and therefore may not be used in road traffic in the Federal Republic of Germany! The Rotlicht Pro (International) may therefore only be used outside the scope of the German STVZO (i.e. abroad – please check the relevant regulations there as well). Details: Max. 120 lumens rear light (red) bluetooth control editionAluminum housing, milled from solid aluminum Charging connection: USB-C Various flashing modes Brake light Individually programmable Brightness sensor IPX 6 (water resistance) IK 09 (impact resistance) Weight: 55g Dimensions: 31 x 32 x 60mm Light duration: min: 2:00 h / max. 40 h Scope of delivery: Lupine Red Light Pro BT (international)Note: the BT Controller must be bought separately 

Lupine SL Bluetooth Remote Control 5.2  The Lupine SL Bluetooth Remote Control 5.2 wirelessly controls both the SL Grano F and the Rotlicht Pro BT from your bike's handlebars. The large button with the headlight symbol turns on the high beam in the dark, while the small button activates the low beam. Note:  The remote control works exclusively with the Grano F and the Rotlicht Pro BT.  Optional handlebar mounts (standard BT mount and XL) as well as a wrist strap mount are available. Included in delivery: SL Bluetooth Remote Control incl. button cell battery

Lupine SL Grano F + Red Light BT (International) Bundle - Complete, remote-controlled lighting system for outdoor and racing use on bicycles The Lupine SL Grano F International features a 150-lumen daytime running light, a two-stage low beam with 350 and 900 lumens of output, and an exceptionally bright high beam of up to 1100 lumens. An ambient light sensor automatically activates the dimmed low beam in automatic mode when it gets dark.  The Red Light International BT offers up to 120 lumens of light output and various lighting modes. Both devices also feature a Bluetooth module and can be activated and controlled at the touch of a button using the handlebar remote. The bundle thus provides complete lighting for the bicycle.   Note:  Please note that the SL Grano INTERNATIONAL and the Red Light International are not approved under the German Road Traffic Regulations (STVZO) and therefore may not be used on public roads in the Federal Republic of Germany! Both lights may therefore only be used outside the scope of the German STVZO! (i.e., abroad—please also check the local regulations there)   Included in the package:  SL Grano F (International) lamp  Rotlicht BT International  Bluetooth remote control with XL mount  Lightcase S  USB-C cable for loading

The right dimmer for the Laserluchs LED-IR brighteners This dimmer was developed especially for the LASERLUCHS® IR-5000 and allows a stepless control of the output brightness. Thus you achieve an optimal and high-contrast image under all lighting conditions. This avoids glare caused by reflections at close range. The LASERLUCHS® brightener+dimmer combination makes your night vision device even more versatile. It is compatible with all LASERLUCHS® IR brighteners and offers a variety of innovative functions such as one-hand operation, battery voltage monitoring and a microprocessor-controlled pulse shift mode, which allows you to achieve outstanding results even in fog, rain and snow. In addition, it is possible to use the brightener to send out the international SOS emergency signal in an emergency and to make yourself noticed by rescue personnel with night vision devices. comfortable and easy one-hand control Stepless brightness control operating status display microcontroller controlled pulse shift mode Compatible with all LASERLUCHS® brighteners Robust construction Made in Germany 36 months manufacturer warranty Technical data LED dimmer Battery CR123 or rechargeable battery Li-ion CR123A Dimmer mode progressive brightness, 0-100% in 35 steps Pulse shift mode 0-200Hz in 1Hz steps Microcontroller 8bit MCU RISC 8Mhz Power consumption in idle state 15µA

Lupine Bike Mount for Wilma - The elegant solution for attaching your headlamp to a bicycle Lupine quick-releases are a way to elegantly attach the lamphead to your bike. A horizontal adjustment mechanism allows the exact adjustment of the light cone on the track. Because the tensioning device is mounted on the handlebar of your bicycle, the light always falls in the direction of travel. Details: High-quality aluminium alloy CNC milled black anodized Optional for pipe diameters of 25.4 mm, 31.8 mm and 35 mm