The LED illuminated front sight for your rifle - shooting with open sights until the dark This LED-Sight allows for shooting accurately under the most adverse light conditions with a simple turn of a a button. Recoil proof, tough, reliable, for the most demanding hunts. Seeing is believing! advantages of the LED-Sight compared against other options: While using a rifle scope, You carry the LED-Sight always on your rifleå«s barrel, while red dots wonå«t be on place when You suddenly need them. Completly waterproof and no optical side effects by glaring through the water like you have by some red dots The Classic edition works in daylight like a traditional black sight: passive without any battery. When You turn the LED on, it plays out itå«s advantages: perfect aiming conditions, even under worst light conditions! (For mainly daylight use, please check the "Day&Nightfire" ore "Firefly" - as those work in sunlight like a fibre sight as well. Very cheap compared to other options like red-dots or scopes Perceft for driven hunts and follow-ups of wounded game... details: easy 1:1 exchange with most rifles: Blaser R93 / Blaser R8 / Blaser K95 / Sauer 202 & 303 & 404 / Heym SR 21 & 30 / Mauser M03, Mauser M12, and many more With all other rifles: all needed is a potrusion bolt on the barrel battery works about 10-12 hours Sight is hight adjustable reduncy: without battery, it works like a classicåÊblack sight manuals for download: Gebrauchsanleitung-deutsch-1-0 (German) Manual-for-LED-Sight (English) Mode-d-EmployåÊ(French)
Innomount BG-1/4 inch torque - screwdriver for mounting riflescopes "Hand-tight" is not enough for us. If you want to mount a riflescope properly and reliably, you should do so with the right torque. With its adjustable torque of 0.8 to 6 Nm, this torque screwdriver covers almost all mounting work on riflescope mounts. The scope of delivery includes 5 bits (Torx & hexagon socket) for the most common Innomount screws. However, any 1/4 inch bit will fit into the holder. Note: For permanent fastening of screws on ZFR mounts, we recommend the additional use of screw locking varnish to prevent screws from loosening unintentionally. We have had good experiences with "Loctite 243" (no guarantee).
Innomount spare parts set 4x sliding block for Swarovski SR rail Sometimes one gets lost or you want to use new ones when remounting the whole set.When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Swarovski SR rail delivery quantity: 4 piecesM4 thread
Innomount spare parts set 4x sliding block for Zeiss rail Sometimes one gets lost or you want to use new ones when remounting. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Zeiss rail delivery amount: 4 pieceM4 thread
LED-Sight 1st generation Classic: buy remaining stock cheaply The LED-Sight 1st generation Classic is only available in our online shop "while stocks last". Because for this model series we carry only remainders, which are now offered particularly favorably. All highlights at a glance: Battery lasts approx. 10 to 12 hours Redundancy: can be used like a normal grain in case of battery failure Height-adjustable luminous grain compatible with many hunting rifles, including Blaser R93, Heym SR 30, Mauser M03 and Sauer 202 Can be used on other weapons using a potrusion-bolts Price unbeatable: Access now! The 1st generation of the Classic illuminated fron sights was characterised by the fact that it was operated with a light emitting diode for the first time and the open sight could therefore be used independently of daylight. At the same time, the Classic LED sight also functions passively just like the regular sight when the LED is not switched on. The LED-Sight is attractive compared to red dot sights - because they cost considerably less. Is the 1st generation Classic LED beacon the right choice? We will be happy to advise you by telephone. You can reach us at +49-6071-922765. Instructions for use for download: Gebrauchsanleitung-deutsch-1-0 (bitte klicken) Manual-for-LED-Sight (English) Mode-d-Employ (French)
LED powered front sight 1st Generation Day&Nightfire for hunting rifles The LED-Sight 1st generation Day&Nightfire differs in the luminosity to the current models and other variants of the illuimnated LED sights. Nevertheless, it enables fast, reliable target acquisition with open sights - even in poor lighting conditions. Since the 1st generation Day&Nightfire gives way to newer models, you can buy the remaining stock from us at reasonable prices. All highlights at a glance: Battery lasts approx. 10 to 12 hours Redundancy: can be used like a normal front sight in case of battery failure Height-adjustable luminous sight can be used during the day in a passive state as a conventional luminous sight compatible with many hunting rifles, including Blaser R93, Heym SR 30, Mauser M03 and Sauer 202 Can be used on other weapons using a potrusion bolts installated on the barrel Advantages for driven hunts and searches The Day&Nightfire already glows passively in daylight like a conventional fibre sight. The LED is switched on at dawn, dusk or simply in poor lighting conditions (e.g. tree shade, cloudy visibility, rain) and optimum target detection can be achieved independently of daylight. Last but not least, target acquisition with LED beacons is much faster and more intuitive when the sights are open, because the rear sight and front sights can be positioned more easily. With a hunting rifle with riflescope, the LED-Sight can easily be carried on the rifle - unlike a red dot sight. The price of the red dot sight also differs, especially now that the 1st generation Day&Nightfire is being sold at particularly low prices. In addition, no reflections, raindrops or scattered light interfere with the target detection, as is the case with some reflex sights. Low-priced remaining stocks: We stock the 1st generation Day&Nightfire LED-Sight "while stocks last". So it's worth it. If you need assistance in selecting the right LED -Sight, please call us at +49-6071-922765. We will advise you individually! Instructions for use available for download in advance: Gebrauchsanleitung-deutsch-1-0 (bitte klicken) Manual-for-LED-Sight (English) Mode-d-Employ (French)
Fibre Insert for Blaser R93 Rifles (yellow-green) The bead shines bright yellow/green in daylight. This fibre insert is to replace the "normal" black bead of the Blaser R93 rifle for a better aiming performance. The dimensions are about: 2,75mm x 11,0 mm x 14,1 mm Hint: Does not fit the Blaser R8 rifles! Therefor please check the LED-Sight, which fits both: Blaser R8 and R93 and many other type of rifles Only the bead insert is beeing delivered, the pictures shows it´s use on the base.
Fibre insert for the exchange of the "normal" front sight insert of the Blaser R93 The luminous fibre insert glows intensely red-orange in daylight. The dimensions are approx.: 2,75mm x 11,0 mm x 14,1 mm Only the fibre insert is supplied. The front sight base is not included in the scope of delivery! Note: The "refurbished" models are a component, which comes from the rejects during the production of the LED-Sights, which are defective, but which does not impair the function as a passive luminous front sight.
Sliding Block for Swarovski SR rail - as a replacement for your riflescope mount Sometimes one gets lost or you want to use new ones when remounting - that's why we offer the sliding blocks for the Swarovski SR rail as a spare part individually. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Swarovski SR rail delivery quantity: one pieceM4 thread
Sliding Block for Zeiss rail - as a replacement for your riflescope mount Sometimes one gets lost or you want to use new ones when remounting - that's why we offer the sliding blocks for the Zeiss rail as a spare part individually. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screw. Details: Sliding block, suitable for Zeiss rail delivery amount: 1 pieceM4 thread
The Titanium Gunworks logo as a sticker for your car or rifle case Our Stone Age hunter logo as a sticker for your car or rifle case - or perhaps you can think of another idea where you can discreetly and cleverly point out our hobby... Details: Size: 77x130 mm white background Design protected
Assembling Screw for Blaser saddle scope mount (Swarovski SR -Rail / Zeiss VM-Rail) The replacement screws for Blaser saddle mount with Swarovski SR-rail or Zeiss VM-Rail. As a replacement or spare part for lost or damaged screws. Since there are several versions, please make sure you check the compatibility! For assembly, we recommend using Loctite 243 and a torque wrench. Details: screw DIN 7984 M4x8 Steel 8.8, black Hexagon socket Recommended max. torque: 3.0 Nm
Assembling screw for Aimpoint Micro H2 - DIN 912 M3x4 The matching screws for mounting an Aimpoint Micro H2 & H1 on most rifle scope mounts. As a replacement for lost or damaged screws. When mounting, we recommend using Loctite 243 and a torque wrench to secure the screws. Details: screw DIN 912 M3x4 Steel 8.8, black Hexagon socket Recommended max. torque: 1.3 Nm
For a successful shot, different factors have to work together perfectly - among other things, the rifle scope assembly is decisive. It has to fit the rifle as well as the mounted sight - and at the same time it has to sit 100% reliably on the rifle to ensure a good target position. Only with the right scope mount can a shot be fired correctly. Here you will find mounting solutions from Recknagel, HMS and many other well-known manufacturers.
The right riflescope mount for the right shot
If the target optic is not fixed absolutely stable on the weapon, a precise shot is not possible. The forces acting during firing would lead to a displacement of the point of impact, so that the target object is missed or not hit correctly. A rifle scope mount therefore has a single purpose: To hold the rifle scope firmly on the hunting rifle and still be able to remove it from the rifle if necessary and to be repeatable when assembled again.
For this purpose, a scope mount should have the following characteristics: high recoil resistance, no changes to temperature and weather fluctuations, suitability for the rifle, and the target optics. In principle, the hunting rifle should also function perfectly when mounted with a rifle scope. This applies, among other things, the repeating of the bolt action and ejecting the cartridge.
Versatile range of ZFR mounts
Meanwhile, the market offers a variety of rifle scope mounts - from saddle mount to swivel mount, for Weaver or Picatinny rail - and almost every hunting rifle manufacturer has its own line. In practice, this not only means a large selection to satisfy individual requirements. It also means that some manufacturers supply their hunting rifles directly with an integrated mounting solution - such as saddle mounting at Blaser.
When choosing a scope mount independently, it is important to pay attention to the accuracy of fit: Is the overall height suitable for the target optics? Can clamping rings and rifle scope be securely connected? Can the rifle scope be removed quickly - for example for transporting the hunting rifle? Steel and aluminium have proven their worth when it comes to materials. They are robust and reliable. Titanium Gunworks offers special products in this area, such as titanium mounts. Our titanium mounts are milled from the solid and plasma-coated - for maximum "blackness" without reflections and from a material that dreams are made of: Titanium!
Our assortment for rifle scope mounts
In our Onlineshop you find different scope mounts and corresponding accessories. Due to many years of own hunting experience we trust in the products of well-known manufacturers like Recknagel, Henneberger (HMS) and Innogun, which are suitable again for different models of Blaser and Sauer.
Whether tilt-up mounting, "Suhler Einhak-Montage" or another solution: We will be happy to advise you personally on the product selection. You can reach us at +49-6071-92276. We will be happy to answer all your questions about our scope mounts.