Innomount quick detachable scope mount for Sauer 404 - Pard NV008 This Innoumount quick detachable mount is a specialy designed for Pard NV008 and SA-Series Night Vision scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Sauer 404 suitable for Pard NV008 / SA-Series Height: 13 mm Type number: 50-PD-13-00-650
Innomount quick detachable scope mount for Blaser - ATN This Innoumount quick detachable mount is a specialy designed for Night Vision scopes from ATN. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for X-Sight I+II / Thor / Mars Height: 12 mm Type number: 50-ATN-12-00-800
Innomount quick detachable scope mount for Blaser - Fortuna General One This Innoumount quick detachable mount is a specialy designed for a Fortuna General One Night Vision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Fortuna General One Height: 14 mm Type number: 50-FG1-14-00-800
Innomount quick detachable scope mount for Blaser - Fortuna General This Innoumount quick detachable mount is a specialy designed for a Fortuna General Night Vision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Fortuna General Height: 18 mm Type number: 50-FG-18-00-800
Innomount quick detachable scope mount for Blaser - TVT Archer This Innoumount quick detachable mount is a specialy designed for a TVT Archer Night Vision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for TVT Archer Height: 13 mm Type number: 50-AR-13-00-800
Innomount quick detachable scope mount for Weaver /Picatinny - ATN This Innoumount quick detachable mount is a specialy designed for a ATN Night Vision scope X-Sight I+II / Thor / Mars. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for ATN X-Sight I+II / Thor / Mars Height: 12 mm Type number: 50-ATN-12-00-200
Innomount quick detachable scope mount for Weaver /Picatinny - ATN 2 piece variable This Innoumount quick detachable mount is a specialy designed for a ATN Night Vision scope X-Sight I+II / Thor / Mars. The mounting is variable in two parts, so that you can adapt it as much as possible to the conditions on your weapon. Details: Clamping lever with protection against unintentional opening repeatable 2 piece variable made of steel suitable for Weaver/Picatinny suitable for ATN X-Sight I+II / Thor / Mars Height: 18 mm Type number: 54-ATN-18-00-200
Innomount quick detachable scope mount for Weaver /Picatinny - Fortuna General This Innoumount quick detachable mount is a specialy designed for a Fortuna General Night Vision. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for Fortuna General Height: 18 mm Type number: 50-FG-18-00-200
Innomount quick detachable scope mount for Weaver /Picatinny - Fortuna General One This Innoumount quick detachable mount is a specialy designed for a Fortuna General One Night Vision. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for Fortuna General One Height: 14 mm Type number: 50-FG1-14-00-200
Innomount quick detachable scope mount for Weaver /Picatinny - Fortuna General One - cranked This Innoumount quick detachable mount is a specialy designed for a Fortuna General One Night Vision. The 40 mm cranking reduces the eye relief to the shooter. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for Fortuna General One Height: 14 mm Cranking: 40 mm Type number: 50-FG1-14-40-200
Innomount quick detachable scope mount for Weaver /Picatinny - Fortuna General - cranked This Innoumount quick detachable mount is a specialy designed for a Fortuna General Night Vision. The 40 mm cranking reduces the eye relief to the shooter. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for Fortuna General Height: 18 mm Cranking: 40 mm Type number: 50-FG-18-40-200
Innomount quick detachable scope mount for Weaver /Picatinny - TVT Archer This Innoumount quick detachable mount is a specialy designed for a TVT Archer Night Vision. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for TVT Archer Height: 13 mm Type number: 50-AR-13-00-2000
Innomount quick detachable scope mount for I Ray Mini This Innoumount quick detachable mount is a special scope mount for the I Ray Mini (Liemke Merlin 19E/25E) thermal imaging device and a Weaver or Pictianny rail on the weapon. The use of a Weaver or Picatinny rail has long been established in the military sector. Due to its high flexibility and reliability it is increasingly used for hunting rifles. The Innomount mount offers precisely fitting and repeatable mounts with quick-release fasteners and a wide range of different mounts for both hunting and sport shooting. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver / Picatinny Rail suitable for I Ray Mini (Liemke Merlin 19E/25E) Height: 16 mm Type number: 50-IRM-16-00-200
Innomount quick detachable scope mount for Weaver/Picatinny - I Ray Mini - two piece variable This Innoumount quick detachable mount is a special scope mount for the I Ray Mini (Liemke Merlin 19E/25E) thermal imaging device and a Weaver or Pictianny rail on the weapon. Due to the two-piece and variable design, you can adapt the scope mounting to a greater extent to the conditions of the weapon & the eye relief to the night vision device. Details: Clamping lever with protection against unintentional opening two piece variable repeatable made of steel suitable for Weaver / Picatinny Rail suitable for I Ray Mini (Liemke Merlin 19E/25E) Height: 17 mm Type number: 54-IRM-17-00-200
Innomount quick detachable scope mount for I Ray X-Sight This Innoumount quick detachable mount is a special scope mount for the I Ray Xsight (Liemke Sperber 50 & 64 / Lahoux Scope) thermal imaging device and a Weaver or Pictianny rail on the weapon. The use of a Weaver or Picatinny rail has long been established in the military sector. Due to its high flexibility and reliability it is increasingly used for hunting rifles. The Innomount mount offers precisely fitting and repeatable mounts with quick-release fasteners and a wide range of different mounts for both hunting and sport shooting. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver / Picatinny Rail suitable for I Ray Xsight (Liemke Sperber 50 & 64 / Lahoux Scope) Height: 16 mm Type number: 50-IRX-16-00-200
Innomount quick detachable scope mount for Weaver/PIcatinny - I Ray X-Sight - 2 pieces variable This Innoumount quick detachable mount is a special scope mount for the I Ray Xsight (Liemke Sperber 50 & 64 / Lahoux Scope) thermal imaging device and a Weaver or Pictianny rail on the weapon. The assembly is variable in two parts - i.e. the rear foot can be changed in its position. The use of a Weaver or Picatinny rail has long been established in the military sector. Due to its high flexibility and reliability it is increasingly used for hunting rifles. The Innomount mount offers precisely fitting and repeatable mounts with quick-release fasteners and a wide range of different mounts for both hunting and sport shooting. Details: Clamping lever with protection against unintentional opening 2 piece variable repeatable made of steel suitable for Weaver / Picatinny Rail suitable for I Ray Xsight (Liemke Sperber 50 & 64 / Lahoux Scope) Height: 17 mm Type number: 54-IRX-17-00-200
Innomount quick detachable scope mount for Sauer 303 - Pulsar Thermion This Innogun quick detachable scope mount is specially designed for the Sauer 303 with ISI mount. The ISI-Mount was used at the beginning of the production of the Sauer 303. The current Sauer 303 self-loading rifles have the newer Sauer SUM mount for the Sauer 404, so depending on how old your Sauer 303 self-loading rifle is, you need the "Sauer 303 mount" (or ISI mount) or the "Sauer 404 mount" (or SUM mount). The mounting is suitable for the Pulsar Thermion thermal scope. Details: Clamping lever with safety device against unintentional opening high accuracy made of steel suitable for Sauer 303 suitable for Pulsar Thermion height: 24 mm Type number: 50-TH-24-00-600
Innomount quick detachable scope mount for Sauer 303 - Pulsar Digex This Innogun quick detachable scope mount is specially designed for the Sauer 303 with ISI mount. The ISI-Mount was used at the beginning of the production of the Sauer 303. The current Sauer 303 self-loading rifles have the newer Sauer SUM mount for the Sauer 404, so depending on how old your Sauer 303 self-loading rifle is, you need the "Sauer 303 mount" (or ISI mount) or the "Sauer 404 mount" (or SUM mount). The mounting is suitable for the Pulsar Digex Nightvision scope. Details: Clamping lever with safety device against unintentional opening high accuracy made of steel suitable for Sauer 303 suitable for Pulsar Digex height: 27 mm Type number: 50-DE-27-00-600
Innomount quick detachable scope mount for Weaver/Picatinny and Pulsar Thermion This Innoumount quick mount is a special scope mount for Pulsar Thermion thermal scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for Pulsar Thermion Height: 24 mm Type number: 50-TH-24-00-200
Innomount quick detachable scope mount for Weaver /Picatinny and Pulsar Thermion - 2-piece variable This Innoumount quick mount is a special scope mount for Pulsar Thermion thermal scope. The mounting is in two parts and can therefore be adapted exactly to the geometrical and spatial requirements of the weapon-side Weaver rail. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny 2 piece variable suitable for Pulsar Thermion Height: 26 mm Type number: 54-PA-26-00-200
Innomount quick detachable scope mount for Weaver/Picatinny and Pulsar Digex This Innoumount quick mount is a special scope mount for Pulsar Digex Nightvision scope. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny suitable for Pulsar Digex Height: 27 mm Type number: 50-DE-27-00-200
Innomount quick detachable scope mount for Weaver /Picatinny and Pulsar Digex - 2-piece variable This Innoumount quick mount is a special scope mount for Pulsar Digex NV scope. The mounting is in two parts and can therefore be adapted exactly to the geometrical and spatial requirements of the weapon-side Weaver rail. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Weaver/Picatinny 2 piece variable suitable for Pulsar Digex Height: 29 mm Type number: 54-DE-29-00-200
Innomount quick detachable scope mount for Pulsar Digex This Innoumount quick detachable mount is a specialy designed for Pulsar Diugex NV scopes. The quick-release mount is repeatable and features innovative quick-release closures. These work reliably and are easy to operate. When closed, they additionally lie in the housing - thus they are secured against unintentional opening and there are no protruding parts. To open, you have to press the push button on the opposite side and the locking lever can be opened. Details: Clamping lever with protection against unintentional opening repeatable made of steel suitable for Blaser rifles suitable for Pulsar Digex Height: 27 mm Type number: 50-DE-23-00-800
Innomount quick detachable scope mount for Sauer 303 - ATN 4 This Innogun quick detachable scope mount is specially designed for the Sauer 303 with ISI mount. The ISI-Mount was used at the beginning of the production of the Sauer 303. The current Sauer 303 self-loading rifles have the newer Sauer SUM mount for the Sauer 404, so depending on how old your Sauer 303 self-loading rifle is, you need the "Sauer 303 mount" (or ISI mount) or the "Sauer 404 mount" (or SUM mount). The mounting is suitable for the ATN 4 Nightvision scope. (Works for X-Sight 4K PRO / X-Sight 4K Buckhunter / Thor 4 as well.) Details: Clamping lever with safety device against unintentional opening high accuracy made of steel suitable for Sauer 303 suitable for ATN 4 (X-Sight 4K PRO / X-Sight 4K Buckhunter / Thor 4) height: 24 mm Type number: 50-ATN4-24-00-600
For a successful shot, different factors have to work together perfectly - among other things, the rifle scope assembly is decisive. It has to fit the rifle as well as the mounted sight - and at the same time it has to sit 100% reliably on the rifle to ensure a good target position. Only with the right scope mount can a shot be fired correctly. Here you will find mounting solutions from Recknagel, HMS and many other well-known manufacturers.
The right riflescope mount for the right shot
If the target optic is not fixed absolutely stable on the weapon, a precise shot is not possible. The forces acting during firing would lead to a displacement of the point of impact, so that the target object is missed or not hit correctly. A rifle scope mount therefore has a single purpose: To hold the rifle scope firmly on the hunting rifle and still be able to remove it from the rifle if necessary and to be repeatable when assembled again.
For this purpose, a scope mount should have the following characteristics: high recoil resistance, no changes to temperature and weather fluctuations, suitability for the rifle, and the target optics. In principle, the hunting rifle should also function perfectly when mounted with a rifle scope. This applies, among other things, the repeating of the bolt action and ejecting the cartridge.
Versatile range of ZFR mounts
Meanwhile, the market offers a variety of rifle scope mounts - from saddle mount to swivel mount, for Weaver or Picatinny rail - and almost every hunting rifle manufacturer has its own line. In practice, this not only means a large selection to satisfy individual requirements. It also means that some manufacturers supply their hunting rifles directly with an integrated mounting solution - such as saddle mounting at Blaser.
When choosing a scope mount independently, it is important to pay attention to the accuracy of fit: Is the overall height suitable for the target optics? Can clamping rings and rifle scope be securely connected? Can the rifle scope be removed quickly - for example for transporting the hunting rifle? Steel and aluminium have proven their worth when it comes to materials. They are robust and reliable. Titanium Gunworks offers special products in this area, such as titanium mounts. Our titanium mounts are milled from the solid and plasma-coated - for maximum "blackness" without reflections and from a material that dreams are made of: Titanium!
Our assortment for rifle scope mounts
In our Onlineshop you find different scope mounts and corresponding accessories. Due to many years of own hunting experience we trust in the products of well-known manufacturers like Recknagel, Henneberger (HMS) and Innogun, which are suitable again for different models of Blaser and Sauer.
Whether tilt-up mounting, "Suhler Einhak-Montage" or another solution: We will be happy to advise you personally on the product selection. You can reach us at +49-6071-92276. We will be happy to answer all your questions about our scope mounts.